Hisoft Squirrel - may need attention

I have a fairly beaten up Squirrel SCSI PCMCIA adapter for sale: Was £15, then £13, now £10+p&p (payment by Paypal gift).

It is sold as untested and possibly temperamental. As far as I am aware it was working when it was last used and has never displayed any faults, but that may not be the case now. I have never used it myself as I have never owned a SCSI device.

Please note the following:

1, No box, manuals or drivers (drivers available here: http://amiga.resource.cx/exp/squirrel)

2, Case appears to be held together with sellotape. The case may have been removed at some point to allow the board to fit inside of a tower case.

3, Some of the SCSI cable rubber appears to have been damaged by a soldering iron (visible in the first picture).

4, There is a black rubbery substance on the SCSI cable.

Price dropped for this refurbishment opportunity :)

May I please ask for a shipping price to Australia?

Provided that I can send it as a small packet, postage to Australia should be no more than £4.50.

Europe should be no more than £3

UK should be no more than £2.50

Matt020,

Would you like me to consider your postage price request to be your declaration of interest in interest in this item, thus putting you first in line?

Hi J-Anaconda, thank's for the follow up.

Because its untested and possibly temperamental, I'll sit back on this one. If you get a chance to test it please let me know! :thumbsup:

Cheers,
Matt.

@J.Anaconda: install the Squirrel drivers in any A600/1200 and plug the card in. No need for SCSI devices hooked.

I think I would like to actually run it with a SCSI device to consider it 'tested'. There is a small amount of superficial damage to the plastic on the outside of the cable, as described above, so really I would really like to test that properly before declaring it working.

Price dropped to £10 + p&p to clear this untested refurbishment opportunity :)

I'll take it. PM'ing for payment details.