I think I mis-read the thread earlier. I would definitely like to buy one of your IDE + RAM boards so please put me down for one. I don't mind assembling it myself. :D
Thanks Tom!
Heather
Printable View
I think I mis-read the thread earlier. I would definitely like to buy one of your IDE + RAM boards so please put me down for one. I don't mind assembling it myself. :D
Thanks Tom!
Heather
I have a huge collection of images I am catagorizing, but I wanted to share this one with you
here is an A1000 (on its 25th birthday)
(click image for SUPER zoom)
http://www.guildserver.co.uk/abay-sh...bs/pic-010.jpg
Enjoying a nice 8MB of Fast Ram and SCSI connectivity
It said it would like to thank Tomthul for its most excellent birthday present =)
I had a chat with the guy whom owns this setup and with a minor modification this adapter could run accelerator cards =)
@ Zetr0 - :bowdown:
my dear tom, how much for one exactly like this, oh and is there any software thats needed to go with it? many thanks EJNQuote:
Originally Posted by tomthul
Hello EJN, this is a zorro slot adapter. It allows you to use
A2000 cards with the A500/1000. The pics are of my first
prototype. The A2000 card I am using is a buddha controller. If you read thru the post there are quite a few A2000 cards that work with this
adapter. Let me know if this was helpful. I do have a few zorro adpaters
for sale. The cost is $20.00 plus $5.00 for shipping.
Tom
Hello Tom!
I'm also interested in buying the adapter where the board stands up.
Is this the price for shipped to Finland? :)Quote:
The cost is $20.00 plus $5.00 for shipping.
thank you so much, yes i did see that quite a few cards were working well, what workbench version did you test the buddha card with? many thanks and i will probably want to buy one of these very shortlyQuote:
Originally Posted by tomthul
I like to buy one or two of your IDE + RAM boards too...
Hello ALL, Many thanks to all who are interested in this project. I
placed an order today for 10 boards. The cost is $35.00 plus $5.00
for shipping. I should be able to ship anywhere for this price. This
is for a blank pcb with parts list. The parts will be printed on the board.
Here is the parts list
1 64 pin dip socket
1 74ls688
1 74ls07
1 74ls139
1 74ls138
1 74ls32
1 74ls244
2 74ls245
4 512k x 8 bit SRAM (AS6C4008 or equivelent)
3 1kohm 1/4w resistors
1 44pin 2mm pitch male header
1 44 pin ide cable (for 2 devices)
1 led
6 .1uf caps
1 hard drive
1 cdrom drive
You will need to solder the parts on the board (no sockets except for
the cpu) to allow the keyboard to fit correctly. Very low profile sockets
may work, but I haven't tried it.
I have been buying the hard drives and cdrom drives from ebay.
the cdrom drives are new and cost about $14.00 The are the small
laptop kind and come in a nice black case.
I have been using used hard drives in the 2-4 gig range.
The cdrom drive will need to be modified by changing the jae to usb
adpter to a jae to 44 pin ide one. The adpter is available from
www.logicsupply.com for about $2.00
If you want one assembled, I will sell assembled units. The cost will
be $125.00 complete with hard drive and cdrom drive.(plus shipping)
It is expensive. When dealing with small quantities the price is going
to be high.
Let me know if I missed anything.
Tom
Do you want payment now, or when they are ready to send?