Amiga 500 teardown, parts for sale.

Hi all...

I am selling various parts salvaged from my old amiga 500 which I reluctantly sacraficed a part from to save my 2000, so I decided to sell the other remining parts to benefit any of you guys in need of them, ok onto the list:

All chips are OCS

Signetics SC68000C8N64 £6

8372A (1MB) Agnus £4

8362 R8 Denise £3

5719 Gary £3

8364-R7 Paula £3

315093-02 Genuine OS 1.3 rom £SOLD

Amiga 500 Shell - very clean very light yellowing (as they do) trapdoor and expansion doors present, Chicken head logo, all rubber feet present, small mark on the bottom left. £SOLD

Keyboard - keys also slightly yellowed, unless you want it, no encoder board, note the board does not have the microprocessor on it as I had to desolder it, I do still have the micrporocessor if you want it (free) so I will include the board and/or microprocessor free if you want it for the LEDs or the rom/ram, oh i'll chuck the keyboard cable in there too:
Keyboard, whole £2
Keyboard - Keys, free
Keyboard - Steel frame, £1
Keyboard - Plastic membrane £SOLD
Keyboard - Membrane cover, comes with the rubber pads and key cap slots £1

Panasonic internal floppy disk drive, reads/writes very well, clean,
Floppy disk power and data cables, £SOLD

Revision 6a mainboard - Worked very well, selling as dead for spares because I had to remove the video filter IC (Pictured) If this is to replace another dead board, it is quite easy to desolder and solder in a filter to get the video working, as I said, the board worked fine beforehand, 512k 70ns ram onboard, £SOLD

Anything you are interested in, let me know, :thumbsup:

EDIT : I have found the box with the polystyrene inserts and I also believe I have the original warranty card, along with the registration card if anyone wants to complete their own amiga package for show or sale! guide £SOLD

@tom2215

I would be interested in the keyboard membrane, controller (inc chips) and motherboard (with chips and ports) how much inc. postage?

Imma gonna try and build a 2MB chip A500 (not a500+), the ports and things will go toward my GB1000 project.

Hi tom2215 , i'm stating interest in the following items :

- Amiga 500 case

- Keyboard , i need F1 and F6 keys , mine are damaged ( Key and spring )
- Keyboard Leds - Red and Amber , Damaged

This are to revive my A500 Plus.

I'm in Portugal and gladly pay through Paypal.

Thanks Pedro

Ok, I'm waiting for a PM from Zetr0 on the following: rev 6A motherboard with all chips (do you want the 1.3 rom as well?) the keyboard membrane and the controller (controller will need discussing so you know exactly what you are getting, I will include 2 microprocessors, one works, one doesn't) PM me! ;)

o0Nosferatu0o I will reply to the PM you sent me, regarding the keys, the case, and if Zetr0 doesn't want it, the 1.3 rom. If Zetr0 doesn't take the controller then you can have the LEDs off of it as well

I'm interested in the floppy drive. Shipping would be to Portugal please.

Edited, found box and warranty/reg cards, selling them too

PM sent to JLPedro, Nosferatu and Zetro

If no one has taken the box/inserts etc Im interested in them :) Will send you a PM

And if there's an F3 key going spare, can I have it please? :D

PM received and replied to Taj! ;)

PM'ed Chiark for F3 key

Thanks :D - pm replied to. Let me know postage ;)