Printable View
You don't get a reply. Kipper goes through a looong list, see page 1. He writes new interests on the list all the time and when he gets to your name he will PM you. I myself have been waiting for months so just brace yourself with patience.Quote:
Originally Posted by Macc
Ah, i wasnt aware of that, looks like the miggy will go in storage for a while then until i receive a pm (as thats the reason i got it)
Sent from my iPhone using Tapatalk
Notice that they are not the same as for the 1200/4000 as they are using two ROM chips, where the 500/600 is using a single chip. The version (and thus, content) is also different, 40.68 for 1200 and 40.63 for 500/600.
Declaring interest in an 8mb board
Hi All,
Check post 1 on this thread, I have 20 boards ready to be mailed tomorrow... So the list is now starting at user "Lukejerry up to user "Amazin" Emails will be sent later today. Boards will now be mailed in boxes instead of padded envelopes, hopefully these are better.
(prices dont change for mailing)
If you are above Amazin and don't receive an email from me let me know and i will sort it. I'll clean out my PMs (full again)
I don't seem to be listed on the first page as declaring interest :blink:Quote:
Originally Posted by kipper2k
Email received, and replied. Payment sent.
One question - also sent by PM, but thought it could be helpful to all....
I have a CDTV and an A500 plus - I have ordered the extra CDTV PLCC - can I easily swap this as required so that I can use the expansion in both machines as and when ?
THANKS
As quoted above, money already sent.:)Quote:
Originally Posted by Tuxbar81
Kipper2k, I have sent a PM this morning.
This was one for my A500, would also like one for an A2000 please.Quote:
Originally Posted by soeter04
Hi Kipper,
PM replied to and payment sent!
Cheers,
ck
Cheers,
ck
Payment sent! :-)
And then I realized I forgot to pay for the cpu adapter... Grrr...
Second payment sent!
Hi there....Anyone tried the board with the CSA Midget Racer (020)? All I get is all the grey screens and 6 flashes of the power led...and then re-boot (on my A1000)...it works with just the 68000 inserted (at least it boots and can see the 8 Mb detected in WB; as haven't connected the 2 missing signals yet for the IDE to work)....but no luck with the Midget....not sure if it is a compatibility problem or bad contacts....had to use 3 CPU risers to get it over the doughterboard...:)...
Anyone with similar issues?
I assume the list is longer than the one that gets updated in the first post. I don't mind waiting but do a certain number of names get added with each update? Thanks. *edit* and it looks like you haven't got my pm. I know you're busy but let me know if you can confirm it was sent.
replied to payment and shipping information on 02/28Quote:
Originally Posted by kinchan
waiting confirmation to finalize the payment
interested in the 8 mb version.
Cool, package arrived today. The board looks even better IRL then it does on pictures. ;-)
Hi kipper2k
just to let you know that, I (as I'm sure many others) am patiently awaiting for the boards to be lovingly produced but would dearly appreciate a broad estimate on lead times. Don't mean this to put any pressure on you, but it could help entertain us while we wait!
Appreciate your hard work to please us all! :thumbsup:
Hi All,
I have 10 boards ready to mail this weekend, and by the end of the weekend i should have at least 5 more ready. Use the first post to see how the list is going, i am getting there, it's slow but you all know its just me doing this. I'll send out emails in the next little while today, and also clear my mail a bit a its full again. I am a bit negligent on checking it as i get a lot and i am slow to go through it.
If your name is not on the first post, dont worry, i am using this threasd to find the order requests
Hi kipper,
My board arrived yesterday. Will test it out on the weekend.
Thanks heaps!
Cheers,
ck
Hi kipper,
email received. PM sent and money transferred!
Looking forward to receiving the board :)
Payment sent!
:)
Hi,
I paid on January 12th, I never got any info about shipment and didn't get any answer to my PMs... Now I see I'm not even on any list neither green, yellow or red one...
What's going on?
Quote:
Originally Posted by HiMark
hi,
I found the payment, i am sorry, i missed you, your order will be mailed tomorrow.
I am sending out 10 more PM's from the list later today.
Kipper2K, please, if you don't want to read the PM I have sent you the 17th february, you can delete it.
You have said me that you sent my order, and I believe you. So, open or delete my PM... I'm not going to ask you a new item for free... I have lost around $100. It's like that.
I'm going to make video modules by myself for the GBA1000.
Thanks.
FYI I've also sent payment a few days ago and pm.
To be clear, the post lost the package. Kipper2k is for nothing with this issue.
I do not hold that against Kipper2k. So, I don't want that he send me a new one. It is not his fault.
He performs a lot of things for the Amiga, and I'm sure he sent me my "order".
Kipper2k, you don't have to send me a new package. As I said in my PM of this evening, I'll send you back.
Be sure that I am not angry against you. Ok?!;)
Tux, sending you a PM :thumbsup:
OK I'm waiting then.
And what about the board you wrote me about im PM?
Reply sent.Quote:
Originally Posted by HiMark
@ thread. 9 more PM's sent. first post updated
Payment sent! Thanks!
declare interest
if still available ;)
PM sent with request to be put at the bottom of the list.
Had a strange issue with mine (strange to me anyway). Installed in both an A500 plus and and standard A500, both with a 2.05 ROM from an A600. Both machines booted from HD and both "sort of" worked, but were unstable.
Random patterns would appear on-screen just when navigating WB. I even created a new HD using the Amiga and 2.05 WB Floppies - and just navigating again was unstable.
I suspected the expansion, as BOTH Amis worked with a GVP HD. But then, the RAM test always worked.
The solution ? I swapped out the ROM for a 3.1 version - result - no further issues. Maybe the IDE libraries in the 3.1 ROM are different ? I have no idea.
Anyone else had similar issues ?
Mine worked fine with a 37.350 ROM in an A500+. Later, I used SKick to softkick it to 3.1. Also worked fine.
Kipper, is the list of buyers up to date? I don't see my name listed yet.Quote:
Originally Posted by kipper2kReply sent.Quote:
Originally Posted by HiMark
@ thread. 9 more PM's sent. first post updated
Declare interest - 1x8MB version if available.
Hi,Quote:
Originally Posted by MoreBITSKipper, is the list of buyers up to date? I don't see my name listed yet.Quote:
Originally Posted by kipper2kReply sent.Quote:
Originally Posted by HiMark
@ thread. 9 more PM's sent. first post updated
Still working through this thread so as i get to the bottom of the names listed in the first post i'll pick up where the names finish off.
@ thread. 5 more done so i will be sending out more PM's (getting there slowly :)
Hi All,
Regrettably i have a imminent death in the family so i have to leave for Engand tomorrow. Please do not send any cash for payments if you have ordered anything. i will be gone for at least a month, i will go online but of course unable to do anything
I present you my deepest condolences.Quote:
Originally Posted by kipper2k
Best Regards.
Sorry to hear that buddy, my condolences :(
All my condolences mate for you and your family...
I did not read that post, so I made my payment, no worry I can wait.
My condolenses, sorry for your loss.Quote:
Originally Posted by kipper2k
Sorry for your loss. Safe journey.
Quote:
Originally Posted by kipper2k
Declaring my interest and pm'ing with some questions.
Very sorry for your loss.
Declaring my interest to one 8mb board to CDTV
Sorry to hear that.Quote:
Originally Posted by kipper2k
I received mine anyway a couple of days ago, so feedback on the way.
Received my board yesterday, installed it, and it worked perfectly. The quality of the craftsmanship is genuinely excellent.
I'm very sorry for your loss
Interested in 1 x 8mb.
I'm very sorry for your loss