Hi there, interested in purchasing 1 led pcb for A1200.
Many Thanks
Julez
Printable View
Hi there, interested in purchasing 1 led pcb for A1200.
Many Thanks
Julez
interested sending pm
Hello,
some parts arrive yesterday and i am ready to build new LED boards.
@hezor, Sautebrussailles, ungatonipon, Foul
your parts are ready, more on PM
@sneeker, please PM to me with colors.
@Vitux, your request is all blue, right?
Then there is very old requests from finnr and lochban1088 and many more: please, PM to me.
Regards
Stefano
and me ?
Blue/white/Red like the french flag :D
Hello,
@HeZoR, Sneeker, Foul, Kaini, finnr, Sautebrussailles,
your items are ready. I will PM you shortly.
I wait a reply from ungatonipon, vitux, lochban1088 and all the people that i have forgotten.
Regards
Stefano
Hello,
@gounderset, mogouk,
your items are ready.
Regards
Stefano
Payment done:)
Geir Ove
Payment done!
Sent from my GT-N7000 using Tapatalk
Payment sent!
Payment sent for two pcb complete kit and one empty pcb.
Yes, all blue, different tonalities
Hello,
@vitux, it is possible only trim the brightness of blue but not change the tonality. Tell me if it is ok.
Regards
Stefano
Yes, Ok, I meant to brightness. Intense blue for the starting.
Could you extend the cable? the motherboard to the LED, 81 cm need.
Also wrapped in a little blue sleeve?
Of course the extra pay
Correction.
Best what you recommend
Hello,
it is possible. It is only a matter of resistor value.
The blue light is very bright and by night can be a little bit annoying. I suggest you to chose a dark blue tonality for the power (that is an ongoing light), then a middle value for the floppy and a bright blue for the harddisk (that light occasionally).
Best regards
Stefano
Hello,
ok, that was not so right! My reply on this thread is right: no tonality, but different brightness with different resistor values.
I will sent to you a PM shortly.
Regards
Stefano
Hello,
@gounderset, mogouk, hezor,sneeker, foul, kaini
your items are sent today!
Regards
Stefano
Vibros, I do not know if you have seen my last post. It read:
Power led, less bright.
The rest, more brightness (same for floppy-HD-Pcmcia)
Hello,
yes, your item is ready. I will post here the pictures, just to see if all is ok.
Regards
Stefano
Thanks Vibros, look forward to receiving it. Will leave feedback when it arrives.
Hello,
@Vitux, here the pictures of your LED board, with a cable of about 85 cm.
Attachment 76799Attachment 76800Attachment 76801
I ask you 15 Eur with postage with tracking.
More on PM.
Regards
Stefano
Declaring Interest. PM Sent i wanna buy 2.
It is very well
Thank you. I will pay in minutes
- - - Updated - - -
Payments sent
Hello,
@Sautebroussailles, Vitux
your items are sent today.
Regards
Stefano
- - - Updated - - -
Hello,
@julezcourt, ia2115, killernetdk, Springycz, Moksud.com, ancalimon and the other people that i have forgotten
please wait! You will be served, if still interested, but i need time.
Regards
Stefano
My interest is still valid. I'll be patiently waiting, keeping eye on this thread :).
Hello,
Springycz, if you wish, PM to me with the colors you wish (even the PCMCIA LED).
Regards
stefano
Items received and feedback left!
A reminder
Interested in
1 blue (power)/ red (floppy) / Red(hard) / Green(PCMCIA)
1 blue (power)/ red (floppy) / Green(hard) / Green(PCMCIA)
1 green, red, red, PCMCIA-Green (Same as original but PCMCIA different colour)
PM sent
Hello,
@all
there is three pieces, blue (power), white (floppy), red (hard disk), with PCMCIA (red or white). Are ready and for sale!
Regards
Stefano
Do you have one for me ?
Hello,
yes, more on PM.
Regards
Stefano
Received mine today, installed looks great! Thanks again vibros.
Feedback Left!
payment sent.
Hello,
@gibs, i will sent the item ASAP.
Regards
Stefano
Hello,
@gibs, item sent today as prioritaire.
Regards
Stefano
mine arrived yesterday ! leeving Feedback
thx :)
Got mine yesterday! Working fine:) Leaving feedback now.
Geir Ove
Ordered from other seller, as i need one for both A1200 and A600. Thanks anyway.
Hello,
@tihopop, send to me a PM with your desired sequence of colors (there is blue, white, red and green).
Regards
Stefano
I sent you money yesterday . :)
Hello,
@Springycz, many thanks! The two items will be shipped ASAP!
Please, do not forget your address (here or on Paypal).
Regards
Stefano
vibros: very nice, I am thinking about ordering one. I'd bet Steve Jobs would announce it as:
"one more thing...it's amaaazing" :D
Hello,
@Mikele, you can send to me a PM with your desired combination of colors (there is blue, white, red and green). Then, i suggest you to read all my replies on this thread.
Regards
Stefano
Payment sent :)
Hello,
@Springycz, items sent today! More on PM.
@finnr, sorry, i have resent to you the payment. When the part is ready, i will sent to you a PM. You will be the first to be served!
Regards
Stefano
Ok, my bad for being slow with payment. Let me know when I should send $$$ :)
Withdrawing interest... too long, mate. Sorry.
Vibros: I received.Silly question: What was the correct position to connect? I do not remember and can not find a clear image on google. I do not want to **** the new LED :-)
Hello vitux,
the black or brown wire is the ground (GND), that is the most right pin (near the floppy reader). But, if you mount this board reverse, nothing will be destroyed.
@all interested on this item (even they that have sent a request with the desired colors):
i need a month to receive new parts. I can't order much quantity, because i do not know if the parts come to me or not. There is another thread, that sell a similar part: if you wish to withdraw your interest on my sale, no problem!
Regards
Stefano
Thanks Vibros, tested and working, looks good.
Total Cost of One to the UK ?