Have you Got an Apollo 060? I need your help!!!

Hello there my fellow AmiBayers

Today I hang my head low, some what defeated....

Amongst things I have been setting up an 060 equipped A1200...... but my my my....

what trouble I am having

have a read here

what I need an official Apollo 060 or Viper060 DISK (or zip/lha/dms) to figure out whats going wrong..

I have tried those available from amiga.resource.cx, even phase 5!

without any luck.

if anyone has anything that can help PLEASE, the little that is left of my hair would thank you emensely!!!!

Theres a bunch of different archives on the english amiga board file server.
http://eab.whdownload.com
(user: amiga, password: eab)

then look in "The Zone!" folder, then in "A"

@PG

my thanks for the links, alas these do not work either =(

I only have cyberstorm 68060 libs & disks:( There also NOT in the tosec archive:whistle:

Gah eh Keith. I've asked nolem on this thread to get back to you. :thumbsup:

Btw, during our phone conversation, I recall us discovering you had the correct Libs in place anyhow. Afair, I had done an Install of 3.9 over 3.1 & my Apollo 060 Libs were in place on the Hard drive. Just for a crack, do you want me to mail them to you in lha format?

Charlie

i thought i'd sorted this already?

/....Kin is wonderiing if you have a Timing issue Zeets?....

Quote:

Originally Posted by JuvUK

i thought i'd sorted this already?

Hiyas m8y,

I am afraid not, it just wouldn't install, either in emulation or on the target machine =(

Quote:

Originally Posted by Kin Hell

/....Kin is wonderiing if you have a Timing issue Zeets?....

Nope, not a hardware fault my friend. card has proven to work before.

okay... I have had some success -

all my installs would fail on WinUAE (in 060 cpu mode) however I have done some new ones using MMULibs

With the help from eab.abime.net and you wonderfull people here I now have a working Workbench 3.1 060 Compatible OS -

here were my lasts tests

_________________________________

Installing MMULib - WinUAE 2.0.1
________________________________

New OS3.1 Install (attempt 1)

Description: New Install
Additional Components:

SetPatch 43.6b
Installer 433

Program MMULib -

Selection: Intermediate User
Selection: Install to SYS:
Selection: Copy
"Copy Files to SYS:OLD"

S/Startup-sequence
Libs/68040.library
C/SetPatch
C/IPrefs
Devs/mfm.device
Libs/mmu.library
Selection: Multiview (amigaguide viewer)
Review: ReadMe First!
Selection: (NO) "Do you use a Phase 5 Accelerator board?"
Selection: (YES) "Do You want to update SetPatch to determin and load the correct processor libraries?"

Proceeds to update SetPatch

Selection: Please pick the MuTools to Install

MuFastRom
MuFastChip
MuScan
MuLockLib
MMU.guide
Tools Copied to SYS:MuTools
Documentation Copied to SYS:MuTools

Selection: (YES) "Shall I run MuFastROM on startup?"

Completes Installs

Selection: Proceed (end install)
___________________________________________

Reboot (040): test boot (Install 1)

Code:

SetPatch (V43.7) has already been installed. Patch list: 680x0 Support Code Loaded Bool CheckIO() workaround Enabled Advanced Graphics Modes AmigaOS Copyright Graphics WritePixelLine8 graphics/WriteChunkyPixel() patched Memory Pools Enable data cache 4.Ram Disk:

Reboot (060): Fail - Guru, crash - constant reboot cycle
Reset (060):Fail - constant reboot cycle

Syn:-

Crashes in a looped cycle, I can access early startup menu, and boot without startup, however the moment SetPach is called the system crashes / gurus etc.

Contents

LIBS:

Code:

68020.library 2192 68030.library 2208 68040.library 43764 68060.library 64820 680x0.library 864

C:

Code:

SetPatch 14864 SetPatch_old 13484

(Setpatch version Info(s))

Code:

SetPatch - 43.7 SetPatch_old - 40.16

S:startup-sequence

Code:

; $VER: Startup-Sequence_HardDrive 40.2 (25.2.93) ; Startup-Sequence for hard drive systems C:SetPatch QUIET C:Version >NIL: C:AddBuffers >NIL: DF0: 15 FailAt 21 C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ Resident >NIL: C:Assign PURE Resident >NIL: C:Execute PURE Assign >NIL: ENV: RAM:ENV Assign >NIL: T: RAM:T Assign >NIL: CLIPS: RAM:Clipboards Assign >NIL: REXX: S: Assign >NIL: PRINTERS: DEVS:Printers Assign >NIL: KEYMAPS: DEVS:Keymaps Assign >NIL: LOCALE: SYS:Locale Assign >NIL: LIBS: SYS:Classes ADD Assign >NIL: HELP: LOCALE:Help DEFER BindDrivers C:Mount >NIL: DEVS:DOSDrivers/~(#?.info) IF EXISTS DEVS:Monitors IF EXISTS DEVS:Monitors/VGAOnly DEVS:Monitors/VGAOnly EndIF C:List >NIL: DEVS:Monitors/~(#?.info|VGAOnly) TO T:M LFORMAT "DEVS:Monitors/%s" Execute T:M C:Delete >NIL: T:M EndIF SetEnv Language "english" SetEnv Workbench $Workbench SetEnv Kickstart $Kickstart UnSet Workbench UnSet Kickstart C:AddDataTypes REFRESH QUIET C:IPrefs C:ConClip Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities IF EXISTS S:User-Startup Execute S:User-Startup EndIF Resident Execute REMOVE Resident Assign REMOVE C:LoadWB EndCLI >NIL:

User-Startup

Code:

;BEGIN MuFastROM SYS:MuTools/MuFastRom On Protect >NIL: ;END MuFastROM ;BEGIN MuFastChip SYS:MuTools/MuFastChip ON >NIL: ;END MuFastChip ;BEGIN MuLockLib SYS:MuTools/MuLockLib >NIL: ;END MuLockLib

ROM: KS ROM v3.1 (A500,A600,A2000) rev 40.63 (512k)

RAM: 2MB Chip / 63MB Z3 Fast

CPU: 68040 and tested on 68060
JIT: Enabled - (standard setting)
CPU Emulation Speed:
Fastest possible, but maintain chipset timing

FPU -
CPU Internal
More compatible

___________________________________

New OS3.1 Install (attempt 2)

Description: New Install
Additional Components:

SetPatch 43.6b
Installer 433

Program MMULib -

Selection: Intermediate User
Selection: Install to SYS:
Selection: Copy
"Copy Files to SYS:OLD"

S/Startup-sequence
Libs/68040.library
C/SetPatch
C/IPrefs
Devs/mfm.device
Libs/mmu.library
Selection: Multiview (amigaguide viewer)
Review: "ReadMe First!"

Selection: (YES) "Do you use a Phase 5 Accelerator board?"
Selection: (YES) "Do You want to update SetPatch to determin and load the correct processor libraries?"

Proceeds to update SetPatch

Selection: Please pick the MuTools to Install

MuFastRom
MuFastChip
MuScan
MuLockLib
MMU.guide
Tools Copied to SYS:MuTools
Documentation Copied to SYS:MuTools

Selection: (YES) "Shall I run MuFastROM on startup?"

Completes Installs

Selection: Proceed (end install)
___________________________________________

Reboot (040 CPU): test boot (Install 2)

Code:

SetPatch (V43.7) has already been installed. Patch list: 680x0 Support Code Loaded Bool CheckIO() workaround Enabled Advanced Graphics Modes AmigaOS Copyright Graphics WritePixelLine8 graphics/WriteChunkyPixel() patched Memory Pools Enable data cache 4.Ram Disk:

Reboot (060 CPU): Crash, Guru

Reset (060 CPU): - Loads to Workbench

Code:

SetPatch (V43.7) has already been installed. Patch list: Bool CheckIO() workaround Enabled Advanced Graphics Modes AmigaOS Copyright Graphics WritePixelLine8 graphics/WriteChunkyPixel() patched Memory Pools Enable data cache 4.Ram Disk:

REM: yes, I also noticed that 680x0 has not loaded, however, if I change the CPU emulation to 040 680x0 does indeed load.

CPU:

Code:

System: 68040 (INST: Cache Burst) (DATA: Cache Burst)

Which Amiga:

Code:

Which Amiga 1.3.3 (2.5.99) Central Processing Unit: MC68060 264.4 MHz (Rev6) Floating Point Unit: not available Memory Management Unit: 68060mmu not available Custom graphics chip: AGA Lisa 4203 (rev0) Custom animation chip: AGA PAL Alice 8374, rev 3-4 Other custom chips: Paula8364 (rev0), Gayle (rev 13) Graphics system: Amiga AGA display bandwidth: 4x Hardware Clock: clock found Max. Chipmem available: 2048 K Max. Fastmem available: 65536 K ROM chip version: 40.63 (kickstart 3.1) Workbench version: 40.42 (Workbench 3.1) SetPatch Version: 53.7 Your computer is an A1200

____________________

Syn:- (Install 2)

It works, but its missing a library (68060.library), 680x0 has not loaded any CPU support, yet the system boots with WinUAE set to 060CPU.

yeah... I am confused too

Files and Install Contents

LIBS:

Code:

68040.library 43764 680x0.library 864

C:

Code:

SetPatch 14864 SetPatch_old 13484

(Setpatch version Info(s))

Code:

SetPatch - 43.7 SetPatch_old - 40.16

S:startup-sequence

Code:

; $VER: Startup-Sequence_HardDrive 40.2 (25.2.93) ; Startup-Sequence for hard drive systems C:SetPatch QUIET C:Version >NIL: C:AddBuffers >NIL: DF0: 15 FailAt 21 C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ Resident >NIL: C:Assign PURE Resident >NIL: C:Execute PURE Assign >NIL: ENV: RAM:ENV Assign >NIL: T: RAM:T Assign >NIL: CLIPS: RAM:Clipboards Assign >NIL: REXX: S: Assign >NIL: PRINTERS: DEVS:Printers Assign >NIL: KEYMAPS: DEVS:Keymaps Assign >NIL: LOCALE: SYS:Locale Assign >NIL: LIBS: SYS:Classes ADD Assign >NIL: HELP: LOCALE:Help DEFER BindDrivers C:Mount >NIL: DEVS:DOSDrivers/~(#?.info) IF EXISTS DEVS:Monitors IF EXISTS DEVS:Monitors/VGAOnly DEVS:Monitors/VGAOnly EndIF C:List >NIL: DEVS:Monitors/~(#?.info|VGAOnly) TO T:M LFORMAT "DEVS:Monitors/%s" Execute T:M C:Delete >NIL: T:M EndIF SetEnv Language "english" SetEnv Workbench $Workbench SetEnv Kickstart $Kickstart UnSet Workbench UnSet Kickstart C:AddDataTypes REFRESH QUIET C:IPrefs C:ConClip Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities IF EXISTS S:User-Startup Execute S:User-Startup EndIF Resident Execute REMOVE Resident Assign REMOVE C:LoadWB EndCLI >NIL:

S:user-startup

Code:

;BEGIN MuFastROM SYS:MuTools/MuFastRom On Protect >NIL: ;END MuFastROM ;BEGIN MuFastChip SYS:MuTools/MuFastChip ON >NIL: ;END MuFastChip ;BEGIN MuLockLib SYS:MuTools/MuLockLib >NIL: ;END MuLockLib

ROM: KS ROM v3.1 (A500,A600,A2000) rev 40.63 (512k)

RAM: 2MB Chip / 63MB Z3 Fast

CPU: 68060
JIT: Enabled - (standard setting)
CPU Emulation Speed:
Fastest possible, but maintain chipset timing

FPU:
CPU Internal
More compatible
____________________________

Addition Testing

As I noticed earlier in the install a missing 68060.library was not installed by the MMULIb installer. System boots fine, even though the emulation was running an 060 without the 680x0 support code loaded.

I have now copied across this missing Library and now setpatch reveals

SetPatch

Code:

AMIGA ROM Operating System and Libraries Copyright © 1985-1997 Amiga International, Inc. All Rights Reserved. SetPatch (V43.7) has already been installed. Patch list: 680x0 Support Code Loaded BOOL CheckIO() workaround Enabled Advanced Graphics Modes AmigaOS Copyright Graphics WritePixelLine8 graphics/WriteChunkyPixel() patched Memory Pools Enabled data cache

so we have a working OS3.1 install with 060 support it seems

*can I just say a BIG YAY!!!!*

CPU

Code:

System: 68040 (INST: Cache Burst) (DATA: Cache Burst)

Cpu060

Code:

System: 68060MC Revision 6 Settings: (INST: Cache Burst) (DATA: Cache Burst) (BRANCH: Cache) (Superscalar) (WriteBuffer) (Store/Load Bypass) Register: CACR=$A0808000 PCR=$04300601 BUSCR=$00000000 Do you own the 68060 Manual ? Do you know what you're doing ? If not use c:cpu because it's all you need! No..cpu060 doesn't make your system faster..only slower... Cpu060 NoDataCache/DataCache functionality is NOT equal to c:cpu DON'T use this tool and if you think you have to ...you must face the consequences

WhichAmiga

Code:

WhichAmiga 1.3.3 (2.5.99) Written by Harry "Piru" Sintonen. Copyright © 1995-1999 PitPlane Productions. Evaluating system... Central Processing Unit: MC68060 273.4 MHz (rev 6) Floating Point Unit: 68060fpu Memory Management Unit: 68060mmu not active Custom graphics chip: AGA Lisa 4203 (rev 0) Custom animation chip: AGA PAL Alice 8374, rev 3-4 Other custom chip(s): Paula 8364 (rev 0), Gayle (rev 13) Graphics system: Amiga AGA display bandwidth: 4x Hardware Clock: clock found Max. Chipmem available: 2048 K Max. Fastmem available: 65536 K ROM chip version: 40.63 (Kickstart 3.1) Workbench version: 40.42 (Workbench 3.1) SetPatch version: 43.7 Your computer is an Amiga 1200.

I Have now installed WHDLoad on top and have just given SuperStardust AGA a bit of a beating =D, I can honestly confirm a Working 060 compatible OS 3.1 install!!!

I cannot say thanks enough for all your help.

All your logic, advice, knowledge and willingness to help others is the real jewel of the Amiga Scene!!!!

My sincere and most thank you to all of you that have contributed here =D

_________________________________

I am just having a bite to eat and I will take this 3.1 install to the target machines for testing before I create a Classic Workbench 060 compatible install.

Well done fella & only you could pull it to bit's for an almost 'picture perfect portrail' so well.

You were quite insistant about getting it to work on WinUAE too. Some serious respect from me m8y. :thumbsup:

Charlie

Good work... but where can one get SetPatch 43.7? Never heard of its existence.

I never had any gurus with what looks a similar setup (no reason for you to get nervous though), I did everything in WinUAE and added ClassicWB and WHDload.