Printable View
ShippedQuote:
Originally Posted by arctus
Ok. I'll wait. Please drop me PM when they available again,Quote:
Originally Posted by tony1999itAt the moment out of stock.
They will be available in the second half of August .
Quote:
Originally Posted by arctus
Items received. Positive feedback left.
Payment sent
ShippedQuote:
Originally Posted by Joostel
I have a SwinSID Nano V2 in one of my C64s and it has a rather annoying chime noise when the C64 is turned on or reset. Do these ones do this?
[QUOTE=Storm;859501]I have a SwinSID Nano V2 in one of my C64s and it has a rather annoying chime noise when the C64 is turned on or reset. Do these ones do this?[/QUOTE
It's a 1KHz test note at the boot.
The chip tests itself playing this note just at the boot.
It's not possible to disable.
How much for two units with shipping to Australia?
Shipping cost for Australia are:Quote:
Originally Posted by Storm
4.60 euro for odinary mail (no tracking)
11.50 euro for registered signed for mail
.... Australia is really far away Europe ...
Sending PM for two pieces.
Edit: Funds sent for two units.
Items received, feedback left.. thanks
Quote:
Originally Posted by tony1999itShippedQuote:
Originally Posted by Joostel
ShippedQuote:
Originally Posted by Storm
Hi!Quote:
Originally Posted by tony1999itHi,Quote:
Originally Posted by novkjoe
the C64C or G have the SID 8580.
The swinsid can be configured to work as SID 6581 or 8580, it's enought to set the jumper:
J1 set ->8580
J2 set ->6581
Of course you can also install in the C64C the swinsid configured as 6581. It will work and the sound will play as the 6581.
Electrical compatibility is guaranteed, the jumper only act on the swinsid sounds filters.
Let me know if I answered you question.
Regards
Tony
Do you have to turn off the computer to set the jumper? What if instead of jumper one would install a switch and changed from 6581 to 8580 and back while working/playing a tune?
Regards,
Units received and positive feedback has been left.
:arms
Quote:
Originally Posted by Storm
Hi ..
I joined Amibay just to find someone selling swinSIDs..
How much to buy 2 including shipping to Manchester UK ?
..and how to go about this ?
sorry ..as I say ..I'm new so am ignorant of the process.
rgds
VS
I sent you a private message
Quote:
Originally Posted by ViperSan
Sending payment now Tony..
I have to make this post as I need to make 2 posts to be able to reply to PM
rgds
items shipped
Quote:
Originally Posted by ViperSan
My SwinSids arrived today Tony ..both tested and working ..
rgds
VS
Interested in buying one unit.
PM sentQuote:
Originally Posted by 64Bandit
Payment sent. I made a mistake so that's why two payments (€18+€0.50).
Sending PM.
Shipped.Quote:
Originally Posted by 64Bandit
Hi Tony,
How much for 1 x swinsid to UK please (cheap postage) ?
helloQuote:
Originally Posted by Azcs
swinsid 15€ + 3.50€ for shipping no tracking.
Cheers
PM Sent
Edit: Payment sent.
ShippedQuote:
Originally Posted by Azcs
Can I order one of these to Norway? Have any left?
Yes available.Quote:
Originally Posted by turrican9
PM ongoing.
Money sent
Swinsid received today, working as intended. Thanks tony. (feedback left)
Small clip in case anyone's interested :)
https://www.youtube.com/watch?v=Q6CPtVtUyy8
Money received.Quote:
Originally Posted by turrican9
I found Mutants is the only game in my collection that has issues with the SwinSID.
So I guess one can switch between 6581 and 8580 on the swinsid on let's say a C64c without any issues? So it's not like to have it in 6581 mode you need to use it on a breadbin board and to have it in 8580 mode you need to use a C64c motherboard?
ShippedQuote:
Originally Posted by turrican9
- - - Updated - - -
HelloQuote:
Originally Posted by turrican9
It's fully compatible with c64 and c64c.
Just move the jumper to select the playing mode (6581 or 8580).
Thanks.
And that is really nice. So we can enjoy the good old 6581 sid without any voltage mods on a C64c. I only have the C64c machines and no breadbins, so that will come in real handy ;)
So I got the Swin SID today. Working nicely :) A few things. First of all the 8580 mode seem to have lower volume VS the real thing. However, when in 6581 mode it seems to have the volume up again. Also, when loading levels in Space Taxi and when the level is loaded, neither of the SID modes seems to play this correctly. Is this normal? Anyone else have this with the swin SID or is there something wrong? Other than that, thus far It seems to be working good with games I've tried. I understand now why many people prefer the 6581 SID VS 8580 :) All my C64s had and have 8580s. So nice to be able to try the 6581 in a C64c ;)
Don't expect it to sound like a real SID. I also have one and while it sounds ok, some things does sound quite different. A SID is hard to emulate, particularly in a pure digital chip.Quote:
Originally Posted by turrican9
Declaring interest, sending PM for payment details
Interested aswell.. Got a dodgy SID which makes weird noises when running the diagnostic carts.
Payment sent, waiting for item to ship
ShippedQuote:
Originally Posted by DarksonDAP
Received and tested, everything works as expected! Thanks for everything!
Interested in one.
Received. Thank you very much.
ShippedQuote:
Originally Posted by a.mi.goun
Hi,
Any left ?, Im interested in one.
Thanks
Yes, available.Quote:
Originally Posted by frankythys
Quote:
Originally Posted by tony1999itYes, available.Quote:
Originally Posted by frankythys
What is the price + shipping to Belgium.
Quote:
Originally Posted by frankythysQuote:
Originally Posted by tony1999itYes, available.Quote:
Originally Posted by frankythys
What is the price + shipping to Belgium.
Hello,
from the first post:
15€ for the swinsid + postage.
postage to other European destinations:
- € 7.50 with signed-for mail;
- € 3.50 with priority mail (no traking)