SID 6581 - 8580 replacements

Printable View

Show 50 post(s) from this thread on one page

18th December 2017, 11:47
mockery

Hi there :)

I was wondering what postage would be to Melbourne, Australia? I'm after a couple of units to finish off some restores :)

Thanks!
Matt
18th December 2017, 14:06
tony1999it

Quote:

Originally Posted by mockery

Hi there :)

I was wondering what postage would be to Melbourne, Australia? I'm after a couple of units to finish off some restores :)

Thanks!
Matt

Hello,
6€ with ordinary mail (no tracking)
11.50€ with registered signed-fom mail.
Australia is really far away :tumbleweed:
2nd January 2018, 18:36
Hemdale

Interested ...

Well, you wrote "v.2" ... never heared of a v2 version. What are the improvements to the original one?

Thanks.
3rd January 2018, 07:10
tony1999it

Quote:

Originally Posted by Hemdale

Interested ...

Well, you wrote "v.2" ... never heared of a v2 version. What are the improvements to the original one?

Thanks.

The improvement is on the pcb that has been completely redesigned by me with little improvements like a very short clock path from clock generator and the microcontroller.
The sw is the "lazy jones" patched version.
7th January 2018, 20:01
neumanix

I'll take one if you still have them. That would be 18.50€ including postage to Finland, right?
Do you take paypal?
7th January 2018, 21:08
tony1999it

Quote:

Originally Posted by neumanix

I'll take one if you still have them. That would be 18.50€ including postage to Finland, right?
Do you take paypal?

Yes available.
PM ongoing.
7th January 2018, 22:07
Hemdale

Still interested and sent PM for further payment details.

- - - Updated - - -

Payment sent.
8th January 2018, 07:55
tony1999it

Quote:

Originally Posted by neumanix

I'll take one if you still have them. That would be 18.50€ including postage to Finland, right?
Do you take paypal?

Shipped

- - - Updated - - -

Quote:

Originally Posted by Hemdale

Still interested and sent PM for further payment details.

- - - Updated - - -

Payment sent.

Shipped
29th January 2018, 07:55
Hemdale

Received & left a pos. Feedback. Thanks.
4th March 2018, 19:09
spcbm

Hi, interested in one priority mail to Spain.
6th March 2018, 22:57
tony1999it

Quote:

Originally Posted by spcbm

Hi, interested in one priority mail to Spain.

PM ongoing.
8th March 2018, 07:59
tony1999it

Quote:

Originally Posted by tony1999it

Quote:

Originally Posted by spcbm

Hi, interested in one priority mail to Spain.

PM ongoing.

Shipped
15th March 2018, 21:35
highzeth

Hey, interested in one, shipped to Norway
16th March 2018, 06:09
tony1999it

Quote:

Originally Posted by highzeth

Hey, interested in one, shipped to Norway

Yes available. PM ongoing.
16th March 2018, 11:06
highzeth

Payment sent.
17th March 2018, 08:17
tony1999it

Quote:

Originally Posted by highzeth

Payment sent.

Shipped.
Thanks
19th March 2018, 14:44
dougal

Hi do you still have left ?
19th March 2018, 22:38
tony1999it

Quote:

Originally Posted by dougal

Hi do you still have left ?

Yes available.
20th March 2018, 16:09
dougal

Sent Payment for one

Thanks :thumbsup:
20th March 2018, 18:24
spcbm

Received and tested on my breadbin, everything OK.
On the reloaded MK2 board it plays OK but the board does not recognize the chip in any mode 6581 nor 8580. Not very important because it plays fine.:thumbsup:
21st March 2018, 11:02
el_pasi

Interested in two units if still available. Signed-for mail to Finland.
21st March 2018, 18:17
tony1999it

Quote:

Originally Posted by dougal

Sent Payment for one

Thanks :thumbsup:

Shipped
21st March 2018, 20:02
tony1999it

Quote:

Originally Posted by el_pasi

Interested in two units if still available. Signed-for mail to Finland.

Yes available.
PM ongoing.
22nd March 2018, 07:22
el_pasi

Very good! Payment sent.
24th March 2018, 08:17
tony1999it

Quote:

Originally Posted by el_pasi

Very good! Payment sent.

shipped
26th March 2018, 13:44
oobumblebeeoo

Awesome, so cheap!
I just bought one of these off you on eBay.
So how would I put it in my C64? It has an 8680, but like the 6581 better... I was told the 6581 voltage is more?

EDIT: It's ok, checked your posts for more info - I found post:
http://www.amibay.com/showthread.php...l=1#post604384

Helpful :)
26th March 2018, 14:42
demolition

Quote:

Originally Posted by oobumblebeeoo

So how would I put it in my C64? It has an 8680, but like the 6581 better... I was told the 6581 voltage is more?

I assume you mean 8580. And yes, the 8580 SID runs with a lower supply voltage, so you need to modify your C64 board to provide the higher supply voltage before the 6581 will work. The filters in 6581 also needs some other filter capacitors or it will not sound correct. Compare the schematics of the two to see how you could do these modifications. If you are unsure about doing this change, I would probably stay away from it since you could easily burn the SID if the supply voltage is too high.
27th March 2018, 09:38
oobumblebeeoo

Ah, so I can't use the swinsid until I do the mod. Bugger.
The guy in the post I posted said it wouldn't need a mod?
27th March 2018, 09:45
demolition

The Swinsid doesn't use the high supply voltage. It just uses the 5V supply so it will run in any motherboard without modifications (it also uses its own filters).
27th March 2018, 14:20
illobo

Hi Tony,

I would be interested in two units if still available. Registered/trackable mail to Italy- thanks a lot

bye
illobo
28th March 2018, 09:19
oobumblebeeoo

Quote:

Originally Posted by demolition

The Swinsid doesn't use the high supply voltage. It just uses the 5V supply so it will run in any motherboard without modifications (it also uses its own filters).

That's what I read yes......................?
28th March 2018, 09:24
demolition

Quote:

Originally Posted by oobumblebeeoo

That's what I read yes......................?

So you still have some doubt? If you want to use a 6581 you need to modify your board, but a Swinsid will run in all models without modifications.
3rd April 2018, 11:50
highzeth

And received, my C64 sings again, glorious days. Thanks!
4th April 2018, 06:19
dougal

Mine arrived yesterday well packaged and looks good. I will try it out after work and leave feedback :thumbsup:
4th April 2018, 20:07
el_pasi

Chips arrived, thanks! Positive feedback left.
12th April 2018, 11:05
dougal

Perfect! I got the chance to try it out yesterday and it worked fine. Just left POSITIVE feedback :thumbsup:
17th April 2018, 10:02
gibs

Declaring interest. Pm on the way
18th April 2018, 17:09
tony1999it

Quote:

Originally Posted by gibs

Declaring interest. Pm on the way

Money received.
I need your address ...
19th April 2018, 11:14
crocolive

Hello

Are you planning to build some SwinSID *Ultimate* version ?
Are the SwinSID nano v.2 are still available ?

What is the price for 1 SwinSID nano v.2 shipped in France ?
Same question with 2 SwinSID nano v.2 ?

Many thanks for your time and work :)
19th April 2018, 12:27
tony1999it

Quote:

Originally Posted by crocolive

Hello

Are you planning to build some SwinSID *Ultimate* version ?
Are the SwinSID nano v.2 are still available ?

What is the price for 1 SwinSID nano v.2 shipped in France ?
Same question with 2 SwinSID nano v.2 ?

Many thanks for your time and work :)

Hello
I can assemble the Swinsids nano v2 only.
For France 1 swinsid is 15€ + 3.50€ with ordinary mail or 7.50€ with the registered one.
Same shipping costs for 2 swinsids.
25th April 2018, 07:22
sgueg40

Hello,
Declaring interest for one shipping to France with registered mail.
Thanks.
25th April 2018, 09:49
sgueg40

Payment is DONE !
26th April 2018, 07:43
tony1999it

Quote:

Originally Posted by sgueg40

Payment is DONE !

Shipped
30th April 2018, 18:41
robheaton

I'm interested in buying two of these, are they still available?
30th April 2018, 20:42
tony1999it

Quote:

Originally Posted by robheaton

I'm interested in buying two of these, are they still available?

Yes available
1st May 2018, 20:00
robheaton

Payment sent for 2 x SwinSids!
3rd May 2018, 07:50
tony1999it

Quote:

Originally Posted by robheaton

Payment sent for 2 x SwinSids!

Items shipped
7th May 2018, 07:46
tony1999it

Quote:

Originally Posted by sgueg40

Payment is DONE !

Item shipped today as requested.
10th May 2018, 09:01
MigyPaatu

I will buy one, need shipping to Finland. Could you pm with payment details ? :)
10th May 2018, 18:56
robheaton

Quote:

Originally Posted by tony1999it

Quote:

Originally Posted by robheaton

Payment sent for 2 x SwinSids!

Items shipped

Packaged arrived today, can't wait to try them out over the weekend! :D

Show 50 post(s) from this thread on one page