Elbox Fast-ATA MKI

For sale Elbox Fast-ATA MKI.

I'm forced to reduce my collection and slowly sells equipment.

I used F-ATA in my A1200 with Apollo 060/80. Hard drive with this configuration reached 8.5MB/s. Hard drive had 80GB.
Contoller work very good with slim DVD, CF cards and hard drive.
Gayle socket has been replaced with a new. I made low-profile socket because orginal was too high and did not fit with DVD slim drive which I mounted inside desktop case.
That custom socket have very good contact with chip.
I'm second user of this hardware.

price: 55 euro (was 70 euro) + shipping + paypal fees (4%) or paypal gift.

Payment via PayPal.

Attachment 77769Attachment 77770Attachment 77771

I'm interested.
----------------
Sorry, I made a hasty decision. I'm not sure whether it would fit in together with the ScanJuggler. That's why I have to withdraw my interest.

I'm interested.

- - - Updated - - -

Hi!

I mounted DVD slim drive inside desktop case,left side in machine, I,m think like You. And I have Scanjuggler 1k2/4k, BPPC and BVisoin card in a desktop case. Can I mount your card in my machine? What is your opinion?

Greetings.

Quote:

---

Originally Posted by corigon

Hi!

I mounted DVD slim drive inside desktop case,left side in machine, I,m think like You. And I have Scanjuggler 1k2/4k, BPPC and BVisoin card in a desktop case. Can I mount your card in my machine? What is your opinion?

Greetings.

---

Hi ;)

I found this picture on the web:
Attachment 77842

According to this image, the Fast-ATA does not interfere with ScanJuggler, so I think they will fit without a problem.

For me it looked like this:
Attachment 77843

On primary was connected CF-Adapter (slave) and 2.5" hard disk under floppy drive (master).
On secondary was connented DVD drive.

So i think this combination is possible. Socket made by me takes less space, certainly will be ok :D

If you will i can add IDE cables gratis.

Hi!

I show you my configuration:
Attachment 77883Attachment 77884

This is my scanjuggler as you can see. And I hope so have enough place to mount your card. For BVision I have to shop from Amigakit the BVisionKit to lift the card. What do You think?

Greetings.

Oppps I forgot about BVison.

BVision Kit rise up FastATA but I think keyboard will not fit in a desktop case.

Probably solution to the issue would be low-profile ROM, eg:

Attachment 77891Attachment 77892

Such a low ROM could be mounted under FastATA :idea:

Images come from this web site:
http://eab.abime.net/showthread.php?p=982360

@ corigon


thanks for the very helpful pic!

I am glad that I may have helped it!

:)

- - - Updated - - -

Hi!

To mount I want nothing! I will my Amiga in desktop case. To be extremely fond and to sell though later i don't want it. Sorry I think We do not knit business unfortunately. Thanks for all the Help!

Greetings!

- - - Updated - - -

Hi!

To mount I want nothing! I will my Amiga in desktop case. To be extremely fond and to sell though later i don't want it. Sorry I think We do not knit business unfortunately. Thanks for all the Help!

Greetings!

No problem m8. We fuond nice solution.

How ScanJuggler? Good stuff?

The Scanjuggler is very fine! Has flickerfixer and there is no problem with him. The VGA connector I installed it onto the place of a RF modulator. An old piece and little take up space. I recommend it!