Project of GBA1000 expansions (PICASSO, Thylacine, 68060) - Batch 2

Printable View

Show 50 post(s) from this thread on one page

3 Attachment(s)

Project of GBA1000 expansions (PICASSO, Thylacine, 68060) - Batch 2

Some members have asked for the PCBs of the Picasso graphic bard, of the Mini-Thylacine and of the 68060 accelerator board for their GBA1000.

The production of the PCBs has been done.
The PCBs has been sent the 03/26/2015 via DHL.
The PCBs are arrived and I have started to send them to interested members.

68060 accelerator PCB Picasso graphic PCB Mini-Thylacine
PCB

Attachment 86072 Attachment 86071 Attachment 86073

Thanks for your attention!

Table under construction!

Members Thylacine 68060 PICASSO PCB price Taxes Total price
(without shipping cost) Paid Sent GD5434 XC95144XL XC9572XL M514260E
-60J x8 K4S561632J
-UC60 x4 74ALVT16543
x4 SL811HS GAL16V8B
-25QP x2 Total
Components + PCBs Taxes Paid 86pins
connector
+
price Package
Ready
+
weight +
Destination

deetsay 2 1 21.634 1.56 23.20 YES 04/08/2015

Rakeim132 1 1 15.54 1.04 16.58 YES 04/07/2015

Tahoe 1 1 15.54 1.04 16.58 1+1 2+2 20.02 0.41 YES YES
156 g
The Netherlands

DutchinUSA 1 1 1 26.89 1.56 28.45 YES 04/08/2015 0 1 1 2 0 4 2 0 19.25 1.14 YES 1
5.60€ YES
94 g
Germany

Tuxbar81 2 1 1 32.03 2.07 34.11 YES - 3 3 5 8 8 4 0 2 164.21 7.73 YES 2
11.20€

extremeways 1 1 1 26.89 1.56 28.45 YES 1 3 2 8 4 4 1 2 92.15 3.78 YES
+ 27.85€ for
shipping cost 1
5.60€ YES
408 g
Australia

uunek 2 20.8 1.04 21.84 YES 04/15/2015

Shaf 1 1 1 26.89 1.56 28.45 YES Wait for
components 1 3 2 8 4 4 1 2 85.92 3.42 YES
+ 23.70€ for
shipping cost Canada

gseb 3 3 46.62 3.11 59.73 YES 04/07/2015

cromwell 1 1 1 26.89 1.56 28.45 0 YES
190 g

skwayb 1 1 21.75 1.04 22.79 YES
+12.15€ for
shipping 1 3 2 8 4 4 76.83 3.21 YES YES
359 g

chiark 1 1 1 26.89 1.56 28.45 YES Wait for components 2 4 3 16 4 4 1 2 89.77 5.34 YES 1
5.60€ YES
448 g
UK

CUF85 1 1 1 26.89 1.56 28.45 YES 04/08/2015

fatbob_gb 1 1 1 26.89 1.56 28.45 YES 1 3 2 8 4 4 1 2
Prog 85.92 3.24 YES
+12.15 for
shipping cost 1
5.60€ YES
426 g
UK

hese 2 2 31.08 2.07 33.15 YES 2 x12 x8 2 91.55 3.47 YES 2
11.20€ YES
478 g
Finland

Francesco 1 1 15.54 1.04 16.58 YES 1 1 1 8 1 2 52.32 2.13 YES YES
183 g
Italy

wali7 1 1 15.54 1.04 16.58 YES 2 8 51.33 2.06 YES
49.33€
(2€ of fees) 1
5.60€ YES
246 g
Poland

sjuswede 1 1 15.54 1.04 16.58 YES 1 1 1 8 1 2 52.32 2.13 YES 1
5.60€ YES
361 g

Ordyne 1.22 1

Total: 20 10 20 439.79 27 15 22 19 94 36 28 12 18 11

Remaining: 0 0 0 3

The following table is for components order is for the GBA1000 expansions and also for the Picasso"Matze".
You'll find the components that you have ordered with the unit price of each of them, and the total price in USD and in Euro.
Please, I'll accept only payment in Euro. Actual conversion rate: $1 USD = 0.919665 €

Parts Ref →
CL-GD5434-J-QC-F XC95144XL XC9572XL M514260E-60J K4S561632J-UC60 74ALVT16543DGG SL811HS GAL16V8B-25QP amount
in USD amount
in Euro

Unit Price → 9,33 3,35 3,35 2,33 1,67 1,65 1,35 1,17

Tahoe 0 0 0 0 0 0 1+1 2+2 3.69 x 2 3.44 x2

DutchinUSA 0 1 1 2 0 4 2 0 20.66 19.25

Tuxbar81 5 3 7 16 4 8 0 2 139.65 130.10

extremeways 1 3 2 8 8 4 1 2 68.37 63.69

Shaf 1 3 2 8 4 4 1 2 61.69 57.47

skwayb 1 3 2 8 4 4 0 0 58 54,04

chiark 2 4 3 16 4 4 1 2 96.36 89.77

fatbob_gb 1 3 2 8 4 4 1 2 61.69 57.47

hese 2 0 0 12 8 0 2 0 62.68 58.39

Francesco 1 1 1 8 0 0 1 2 38.36 35.74

wali7 2 0 0 8 0 0 0 0 37,3 34,75

sjuswede 1 1 1 8 0 0 1 2 38.36 35.74

Ordyne 1 0 1 4 0 0 0 0 22 20,50

viserys23 2 0 2 8 0 0 0 0 44 40,99

shaf 1 0 1 4 0 0 0 0 22 20,50

johey 3 0 3 12 0 0 0 0 66 61,49

piacc64 1 0 1 4 0 0 0 0 22 20,50

Cryton 1 0 1 4 0 0 0 0 22 20,50

Total : 26 22 30 138 36 32 12 18 884.81 824.32

In the following table, you'll find the final amount you'll have to pay. The amounts are in €uros!
When it's possible, you have the choise between TRACKED or REGISTERED option.

Member
Package
Weight
Country Zone Tracked
shipping
amount Registered
shipping
amount Components
Taxes
86 pins
connector
price
Ship already Paid
Total amount with tracked
Total
amount with Registered
Paid
Sent

Tahoe 156g The Netherlands A 7,7 12,15 0,4 0 0 8,1 12,55 YES 06/24/2015

DutchinUSA 94g Germany A 5,5 12,15 1,12 5,6 0 12,22 18,87 YES 06/18/2015

Tuxbar81 -

extremeways 408g Australia C
23,7 3,68 5,6 27,85
5,13 YES 07/18/2015

Shaf 390g Canada C
23,7
4,51 0 23,7
4,51 YES 06/18/2015

cromwell 190g Sweden A 7,7 12,15 0 0 0 7,7 12,15

skwayb 359g USA C
23,7 3,13 0 12,15
14,68 YES 09/02/2015

chiark 448g United Kingdom A
12,15 5,19 5,6 0
22,94 YES 06/18/2015

fatbob_gb 426g United Kingdom A
12,15 3,32 5,6 12,15
8,92 YES 06/20/2015

hese 478g Finland A
12,15 3,38 11,2 0 26,73 YES 06/23/2015

Francesco 183g Italy A 7,7 12,15 2,07 0 0 9,77 14,22 YES

wali7 246g Poland A
12,15 2,01 5,6 0 19,76 YES 06/23/2015

sjuswede 361g Sweden A
12,15 2,07 5,6 0 19,82

Shipping rates:

International with track number: (Max height of the package: 3 cm)

Weight up to: 100g 250g 500g

Europe 5.20€ 7.70€ 10.20€

World 5.80€ 9.70€ 11.70€

International with track number & registered: (begin with 0 to 500g...)

Weight up to: 500g

Europe (Zone A - European Union, Switzerland) 12.15€

World Zone B (Norway, Eastern Europe except Russia) 16.20€

World Zone C (Other destinations) 23.70€

Payment:

When your PCBs are ready to be shipped, I send a PM to ask for your postal address and to give you the total amount and my Paypal address.

As for the first batch, I don't make any profit with the production of PCBs. My goal is to obtain PCBs for a good price for the Amiga community and of course for me!

I DON'T ASK FOR PAYMENT BEFORE THAT YOUR ORDER IS READY TO BE SHIPPED.

Payment by Paypal with Gift option or buyers pay the fees.

4th November 2014, 05:28
Rakeim132

Nice. Thanks mate. :)
4th November 2014, 12:47
gseb

Looking on the Picasso II PCB, it seems that there is a new version (ver 3.3 including ratte switch). It's on Georg's internet page.
If you'll make a batch with the 3,3 rev, i could be interested. Do you know +- the price per unit for those boards ?
4th November 2014, 13:55
Tuxbar81

Yes, I know. I have all versions, and I have generated the Gerber files for all revisions.
For the first batch, I have produced the 3.2 rev since we had already bought the ICs (GALs and Xilinx).
For this new batch I have planed to produced the 3.3 rev.:)

The price will depend on the number of PCB ordered.
4th November 2014, 13:58
Tahoe

Expressing interest in one extra thylacine (already one in the first batch) and a Picasso rev 3.3 please!
4th November 2014, 15:15
Tuxbar81

Quote:

Originally Posted by gseb

Looking on the Picasso II PCB, it seems that there is a new version (ver 3.3 including ratte switch).

If I don't make mistake, The difference beetwen 3.2 and 3.3 rev is the GALs which are replaced with an XC IC.
8th November 2014, 07:25
gseb

Yes, sorry :oops:
The 3.2 has the switch too...
8th November 2014, 08:07
Tuxbar81

Quote:

Originally Posted by gseb

Yes, sorry :oops:
The 3.2 has the switch too...

No problem my friend! :)

For information, onto the DHL website, the state of the parcel of the first batch is: "Departed Facility in HONG KONG"
It is in DHL agency since some days... It's long. I hope to have them in the begining of the week...
8th November 2014, 20:39
britlord

Hi. count me in for one 68060 accelerator PCB and one Picasso graphic PCB please......

THX...
8th November 2014, 20:50
Tuxbar81

@gseb: Finally, you want a Picasso 3.3 PCB? ;)
9th November 2014, 02:49
Rakeim132

Little question (might be answered already in a previous thread) : how do we get the components after that ? Is there lists or kits available somewhere ?
9th November 2014, 07:09
Rakeim132

Is the 32 MB card interesting for the GBA 1000 and compatible with all these goodies ?

And by the way, are all of these cards compatible together to go in ONE single machine ?
9th November 2014, 09:47
Tuxbar81

The ICs can be found near UTSource for example.
The classic components (Resistors, capacitors,etc) can be found near classic electronic sellers.

No, the 32Mb card is not interesting for the GBA1000. It's now an obsolete expansion. The eagle files are not available for this board.
And the 68060 accelerator board gives 64 ar 128Mb depending of RAM chip used.

The 060 board, the Mini-Thylacine & the Picasso Graphic board can be can be used onto a one single GBA1000.
To use the Picasso board, the 060 is absolutely necessary.
9th November 2014, 15:47
Rakeim132

Fantastic. Thanks for the clarification !
Merci ! :)
10th November 2014, 04:57
extremeways

Please put me down for 1 of each board please Tuxbar81 (1 x accelerator + 1 x Thylacine + 1 x picasso)

I'm kicking myself that I missed the first batch.

Thanks!
10th November 2014, 06:37
uunek

Interested - 2x Picasso. Thank you.
11th November 2014, 02:18
dhoelzer

This sounds really awesome.. I want to be clear though.. These boards are for... A Zorro II slot or does the GBA1000 68060 go into the processor slot on a A2000? If the answer to that is "Yes" then please put me down for all three as well.
12th November 2014, 00:11
shaf

Also put me down for all 3 boards.
12th November 2014, 08:03
Tuxbar81

Quote:

Originally Posted by dhoelzer

This sounds really awesome.. I want to be clear though.. These boards are for... A Zorro II slot or does the GBA1000 68060 go into the processor slot on a A2000? If the answer to that is "Yes" then please put me down for all three as well.

Sorry, but the 060 accelerator board is plugged into the 68030's socket of the GBA1000.

The Picasso board is a Zorro II board, but you should be more interested with this version:

http://www.amibay.com/showthread.php...1000-1st-Batch

For the mini-thylacine, you should take a look at this excellent thread launched by genny_flick:

http://www.amibay.com/showthread.php...mini-thylacine

Voilà!
12th November 2014, 19:58
sjuswede

Preliminary interest in a Picasso and a Thylacine board for a GBA1000. I think I have a GBA1000 incoming, and will know before the end of the coming weekend. If I do I want the Picasso and Thylacine for sure.
12th November 2014, 21:03
Tuxbar81

Quote:

Originally Posted by sjuswede

Preliminary interest in a Picasso and a Thylacine board for a GBA1000. I think I have a GBA1000 incoming, and will know before the end of the coming weekend. If I do I want the Picasso and Thylacine for sure.

I'm happy to hear that you should have a GBA1000 PCB soon!
Keep me informed to see if I have to add you to the table.
13th November 2014, 07:58
Rakeim132

Hello Tuxbar. Apologies but I will withdraw my interest for the 060 card PCB.

Still into the Thylacine and the Picasso (although a bit confused by the discussions about the revision for that last one. I trust you'll go for the right and most advanced design for this one).
13th November 2014, 08:26
Tuxbar81

Quote:

Originally Posted by Rakeim132

Hello Tuxbar. Apologies but I will withdraw my interest for the 060 card PCB.

Still into the Thylacine and the Picasso (although a bit confused by the discussions about the revision for that last one. I trust you'll go for the right and most advanced design for this one).

Hello Rakeim,

The last actual revision of the Picasso board is the rev33. Except if a new version is released, this is this one which will be produced.
A little precision: the Picasso board needs more memory than the quantity which is present onto the GBA1000. This is why the 060 board is needed.
Let me know how you want to do!
13th November 2014, 08:29
Rakeim132

Thanks, I remember you said it. Don't worry I'm planning to run it on the right processor and memory... ;)
13th November 2014, 08:31
Tuxbar81

Ok, I have removed the 060 PCB on your line!
19th November 2014, 16:47
britlord

Guys. I've found a good Source for the CL-GD5434-J-QC-F chip that's needed for the Picasso board, and at a good price too (If you just want one unit and solder it in yourself)....

http://www.ebay.com/itm/131332866578...%3AMEBIDX%3AIT
19th November 2014, 16:54
Tuxbar81

Quote:

Originally Posted by britlord

Guys. I've found a good Source for the CL-GD5434-J-QC-F chip that's needed for the Picasso board, and at a good price too...

http://www.ebay.com/itm/131332866578...%3AMEBIDX%3AIT

I paid 5.38€ near UTSOURCE, but it was for 20 units.
19th November 2014, 18:04
britlord

Quote:

Originally Posted by Tuxbar81

Quote:

Originally Posted by britlord

Guys. I've found a good Source for the CL-GD5434-J-QC-F chip that's needed for the Picasso board, and at a good price too...

http://www.ebay.com/itm/131332866578...%3AMEBIDX%3AIT

I paid 5.38€ near UTSOURCE, but it was for 20 units.

20 unit's would be too many for me lol... But I understand why you bought 20 of them..
21st November 2014, 01:11
voyager_1701e

I checked the thread as best I could, but would this Thylacine be compatible with a Zorro Amiga like 4000?
21st November 2014, 09:59
Tuxbar81

Quote:

Originally Posted by voyager_1701e

I checked the thread as best I could, but would this Thylacine be compatible with a Zorro Amiga like 4000?

I see no limitation. It's a zorro II board. But for the mini-thylacine (with 4 USB ports), you should take a look at this excellent thread launched by genny_flick:

http://www.amibay.com/showthread.php...mini-thylacine
25th November 2014, 15:12
shaf

By looking at the picture it seems like a different version Picasso board than your other thread.
26th November 2014, 00:57
Heesu

Hi.
first , I wish that possible to want gba1000 PCB.
26th November 2014, 21:02
Tuxbar81

Quote:

Originally Posted by shaf

By looking at the picture it seems like a different version Picasso board than your other thread.

Yes, this version is for the GBA1000. The other one is for A500/2000/4000.

- - - Updated - - -

Quote:

Originally Posted by Heesu

Hi.
first , I wish that possible to want gba1000 PCB.

Hi Heesu,

You should open a thread for a request into "wanted Amiga Hardware" section of the forum. Perhaps could you find one!
27th November 2014, 12:25
gseb

Also interested on this PII version and thylacine... Please let me know when I will have to do the payment. Thank you
1st December 2014, 08:11
deetsay

I would like to upgrade to 2 * Thylacine, please! (And keep 1 68060 of course)
11th December 2014, 18:23
cromwell

I'm interested in all three :) Sign me up on one of each.
5th January 2015, 17:51
gseb

When possible, I would like to take one more PII and one more thylacine.
Total, 2 of each board. Thank you very much
13th January 2015, 21:10
skwayb

If there are still any available, put me down for the 68080 and Picasso
14th January 2015, 07:19
Tuxbar81

Quote:

Originally Posted by skwayb

If there are still any available, put me down for the 68080 and Picasso

That will be posible for the 68060 and the Picasso, but for the 68080, we'll have to wait for the release... not sure this year! :)
14th January 2015, 08:31
chiark

One of each, please :D, if this is still possible?
14th January 2015, 18:32
skwayb

Sorry meant the 060.... LOL Put me down for that.
17th January 2015, 18:57
britlord

Can both the Picasso graphic PCB Mini-Thylacine be used at the same time in the zorro II slot. If so please put me down for a Mini-Thylacine Please
17th January 2015, 20:26
CUF85

Interested in one board of each please.
17th January 2015, 23:38
FastRobPlus

I was under the impression that mini thylacine is used on the front Zorro edge connector rather than the zorroII slot in the center of the board.
18th January 2015, 09:40
Tuxbar81

Quote:

Originally Posted by FastRobPlus

I was under the impression that mini thylacine is used on the front Zorro edge connector rather than the zorroII slot in the center of the board.

You are right. The Picasso board is plugged into the Zorro II connector, the Thylacine is plugged into the front connector, and the 060 accelerator onto the 68030 socket.
18th January 2015, 19:02
britlord

Tuxbar81. Please put my down for one Thylacine..

Thanks....
18th January 2015, 21:10
Tuxbar81

Quote:

Originally Posted by britlord

Tuxbar81. Please put my down for one Thylacine..

Thanks....

Done!:)
18th January 2015, 21:48
britlord

- - - Updated - - -
Thanks though I see that you haven't added CUF85 to the list, as he wants one of each board..
18th January 2015, 22:28
fatbob_gb

I am interested in one of each.
19th January 2015, 07:13
Tuxbar81

Quote:

Originally Posted by britlord

- - - Updated - - -
Thanks though I see that you haven't added CUF85 to the list, as he wants one of each board..

You're right! Sorry CUF85... You're in the table now!

- - - Updated - - -

Quote:

Originally Posted by fatbob_gb

I am interested in one of each.

added!

Show 50 post(s) from this thread on one page

68060 accelerator PCB	Picasso graphic PCB	Mini-Thylacine PCB
Attachment 86072	Attachment 86071	Attachment 86073

Members	Thylacine	68060	PICASSO	PCB price	Taxes	Total price (without shipping cost)	Paid	Sent	GD5434	XC95144XL	XC9572XL	M514260E -60J x8	K4S561632J -UC60 x4	74ALVT16543 x4	SL811HS	GAL16V8B -25QP x2	Total Components + PCBs	Taxes	Paid	86pins connector + price	Package Ready + weight + Destination
deetsay	2	1		21.634	1.56	23.20	YES	04/08/2015
Rakeim132	1		1	15.54	1.04	16.58	YES	04/07/2015
Tahoe	1		1	15.54	1.04	16.58									1+1	2+2	20.02	0.41	YES		YES 156 g The Netherlands
DutchinUSA	1	1	1	26.89	1.56	28.45	YES	04/08/2015	0	1	1	2	0	4	2	0	19.25	1.14	YES	1 5.60€	YES 94 g Germany
Tuxbar81	2	1	1	32.03	2.07	34.11	YES	-	3	3	5	8	8	4	0	2	164.21	7.73	YES	2 11.20€
extremeways	1	1	1	26.89	1.56	28.45	YES		1	3	2	8	4	4	1	2	92.15	3.78	YES + 27.85€ for shipping cost	1 5.60€	YES 408 g Australia
uunek			2	20.8	1.04	21.84	YES	04/15/2015
Shaf	1	1	1	26.89	1.56	28.45	YES	Wait for components	1	3	2	8	4	4	1	2	85.92	3.42	YES + 23.70€ for shipping cost		Canada
gseb	3		3	46.62	3.11	59.73	YES	04/07/2015
cromwell	1	1	1	26.89	1.56	28.45												0			YES 190 g
skwayb		1	1	21.75	1.04	22.79	YES +12.15€ for shipping		1	3	2	8	4	4			76.83	3.21	YES		YES 359 g
chiark	1	1	1	26.89	1.56	28.45	YES	Wait for components	2	4	3	16	4	4	1	2	89.77	5.34	YES	1 5.60€	YES 448 g UK
CUF85	1	1	1	26.89	1.56	28.45	YES	04/08/2015
fatbob_gb	1	1	1	26.89	1.56	28.45	YES		1	3	2	8	4	4	1	2 Prog	85.92	3.24	YES +12.15 for shipping cost	1 5.60€	YES 426 g UK
hese	2		2	31.08	2.07	33.15	YES		2			x12	x8		2		91.55	3.47	YES	2 11.20€	YES 478 g Finland
Francesco	1		1	15.54	1.04	16.58	YES		1	1	1	8			1	2	52.32	2.13	YES		YES 183 g Italy
wali7	1		1	15.54	1.04	16.58	YES		2			8					51.33	2.06	YES 49.33€ (2€ of fees)	1 5.60€	YES 246 g Poland
sjuswede	1		1	15.54	1.04	16.58	YES		1	1	1	8			1	2	52.32	2.13	YES	1 5.60€	YES 361 g
Ordyne																		1.22		1

Total:	20	10	20	439.79	27				15	22	19	94	36	28	12	18				11
Remaining:	0	0	0																	3

Parts Ref →	CL-GD5434-J-QC-F	XC95144XL	XC9572XL	M514260E-60J	K4S561632J-UC60	74ALVT16543DGG	SL811HS	GAL16V8B-25QP	amount in USD	amount in Euro
Unit Price →	9,33	3,35	3,35	2,33	1,67	1,65	1,35	1,17
Tahoe	0	0	0	0	0	0	1+1	2+2	3.69 x 2	3.44 x2
DutchinUSA	0	1	1	2	0	4	2	0	20.66	19.25
Tuxbar81	5	3	7	16	4	8	0	2	139.65	130.10
extremeways	1	3	2	8	8	4	1	2	68.37	63.69
Shaf	1	3	2	8	4	4	1	2	61.69	57.47
skwayb	1	3	2	8	4	4	0	0	58	54,04
chiark	2	4	3	16	4	4	1	2	96.36	89.77
fatbob_gb	1	3	2	8	4	4	1	2	61.69	57.47
hese	2	0	0	12	8	0	2	0	62.68	58.39
Francesco	1	1	1	8	0	0	1	2	38.36	35.74
wali7	2	0	0	8	0	0	0	0	37,3	34,75
sjuswede	1	1	1	8	0	0	1	2	38.36	35.74
Ordyne	1	0	1	4	0	0	0	0	22	20,50
viserys23	2	0	2	8	0	0	0	0	44	40,99
shaf	1	0	1	4	0	0	0	0	22	20,50
johey	3	0	3	12	0	0	0	0	66	61,49
piacc64	1	0	1	4	0	0	0	0	22	20,50
Cryton	1	0	1	4	0	0	0	0	22	20,50
Total :	26	22	30	138	36	32	12	18	884.81	824.32

Member	Package Weight	Country	Zone	Tracked shipping amount	Registered shipping amount	Components Taxes	86 pins connector price	Ship already Paid	Total amount with tracked	Total amount with Registered	Paid	Sent
Tahoe	156g	The Netherlands	A	7,7	12,15	0,4	0	0	8,1	12,55	YES	06/24/2015
DutchinUSA	94g	Germany	A	5,5	12,15	1,12	5,6	0	12,22	18,87	YES	06/18/2015
Tuxbar81		-
extremeways	408g	Australia	C		23,7	3,68	5,6	27,85		5,13	YES	07/18/2015
Shaf	390g	Canada	C		23,7	4,51	0	23,7		4,51	YES	06/18/2015
cromwell	190g	Sweden	A	7,7	12,15	0	0	0	7,7	12,15
skwayb	359g	USA	C		23,7	3,13	0	12,15		14,68	YES	09/02/2015
chiark	448g	United Kingdom	A		12,15	5,19	5,6	0		22,94	YES	06/18/2015
fatbob_gb	426g	United Kingdom	A		12,15	3,32	5,6	12,15		8,92	YES	06/20/2015
hese	478g	Finland	A		12,15	3,38	11,2	0		26,73	YES	06/23/2015
Francesco	183g	Italy	A	7,7	12,15	2,07	0	0	9,77	14,22	YES
wali7	246g	Poland	A		12,15	2,01	5,6	0		19,76	YES	06/23/2015
sjuswede	361g	Sweden	A		12,15	2,07	5,6	0		19,82

Weight up to:	100g	250g	500g
Europe	5.20€	7.70€	10.20€
World	5.80€	9.70€	11.70€

Weight up to:	500g
Europe (Zone A - European Union, Switzerland)	12.15€
World Zone B (Norway, Eastern Europe except Russia)	16.20€
World Zone C (Other destinations)	23.70€