A500 IDE adapters, PS/2 mouse adapter, A600 CF adapter

Quote:

---

Originally Posted by mkl

NOTE
---------- Post added at 22:02 ---------- Previous post was at 21:57 ----------

[/COLOR]a thought, A500+ gary might have difference (in need of /ovr) vs a500 (????) - or not.[COLOR="Silver"]

---

The Gary chip is the same on Rev6 and Rev8 mobos.

ide-adapter arrived yesterday and after a bit testing it works great.
Thanks Mika, feedback left

Got mine today! thank you very much Mika. Feedback left.
Now... the installation part.:blink:

Who all have installed this in an A500+? Did you have a clearance issue?

Also who all have got the LED hack working? What did you do to get it to work?

Installation done on my A1K using Kickstart 3.1 under TwinKick and it works great!

Thank you very much.

has anyone used this with a djbase kick start print and a K 1.3 in an amiga 1000.
I get my cf under 1.3 not booted.
I have maybe a mount and scsi recognition problem.
under 3.1 works well I do have a scsi in my 1.3 with version I see though

Quote:

---

Originally Posted by TjLaZer

Who all have installed this in an A500+? Did you have a clearance issue?

Also who all have got the LED hack working? What did you do to get it to work?

---

Fits fine in a 500+ but I've got faulty cpld code and can't use the secondary connectors as they don't work.

Quote:

---

Originally Posted by oldman1000

has anyone used this with a djbase kick start print and a K 1.3 in an amiga 1000.
I get my cf under 1.3 not booted.
I have maybe a mount and scsi recognition problem.
under 3.1 works well I do have a scsi in my 1.3 with version I see though

---

1.3 doesn't have the 2.05 version of the scsi.device file (needed to support gayle ide) in rom so you'll need to make a boot floppy to use it under 1.3.

Quote:

---

Originally Posted by TjLaZer

Also who all have got the LED hack working? What did you do to get it to work?

---

It works, I've done this: (Rev 8a board)

Quote:

---

Originally Posted by mkl

Try and connect secondary LED+ signal to pin 8 of keyboard header connector (in case of v401/v402 and Amiga 500)

---

But here it is a very weak illumination, if you don't have eyes like an eagle or better, you see nearly nothing. ;) At least it works!

Cheers,
Thomas

got mine today just in time for the weekend:D

thanks Mika:thumbsup: