Hello guys :grouphug:
I have for sale a Phase 5 made CyberVisionPPC card suitable for CyberStormPPC and CyberStorm060MK3 :blink:
Card has been running fine on my A4000 running OS4. It is one of the fastest Amiga graphics boards out there :respect:
I have added 8 blue anodized Zalman heatsinks to the memory chips and one blue anodized Zalman heatsink to one of the other chips on the board. Heatsinks are not only for show, they do actually get hot :p (you could probably remove them if you want to replace them since they are attached with fragtape, but they look like a million bucks on the card so I suggest you keep them)
The Permedia2 chip has no heatsink attached to it, just as they came from the factory back in 1998 :nuts:
I highly suggest you add active cooler to the GPU on the board before running it if you want to enjoy the card for many years to come :nod:
You will get:Quote:
Taken from BBOAH
Chipset(s)TVP 4020GFN (Permedia 2)
Graphics Memory 8MB (64bit SGRAM, 800MB/sec)
8bit Support: Yes
16bit Support: Yes
24bit Support: Yes
Display Drivers CyberGraphX V2: No
CyberGraphX V3: Yes
CyberGraphX V4: Yes
Picasso 96: No
EGS: NoOther: No
The Cybervision PPC is designed to connect to the local PCI expansion bus found on the Cyberstorm PPC, and Cyberstorm Mk-III accelerators.
It is one of the most powerful native graphics cards for the Amiga and has a pixel clock of 230Mhz (8bit), 230Mhz (16bit), 145Mhz (24bit) and 100Mhz (32bit). It has hardware support for 80 million textured pixels/sec. Hardware functions for Z-Buffering, Gouraud Shading, Fogging, Blending and Anti-Aliasing.
It also has a special connector for the use of 3D glasses which allow you to see "life-like" 3D. The card is rather an odd shape, sort of rectangular but being tapered at one edge.
Note, you can not use draggable screens with this card, even if you have that option selected within CyberGraphX, and there is also no provision for a scandoubler, flickerfixer or passing native video. It does however have support for "patching" the system to allow it to display the native graphics.
-Phase 5 made CyberVisionPPC with 9 small heatsinks attached to it, this is the A4000D version so it lacks connector for running it in an Amiga 3000, which is good, coz there is more space for heatsink then :D.
-VGA cable that attaches to the card, the cable is a bit wonky, sometimes I have not got a signal from it, after bending it a bit it have worked 100%, I suggest running a multimeter through it, build a new cable (with better shielded cables) or get a new cable from AmigaKit.
-You will also get CyberGraphX V4 CD for free :woot: (original version, no pirate copy :thumbsdown:)
Sorry, no pictures, my wife loaned the camera this month and is off on vacation :thumbsdown:
Price: 110 euro :woot:
Shipping: 10 euro to EU :cool: (add 10 euro to other locations, I will cover the rest if the freight is not insane)
Payment: Paypal :bowdown:
Danke schön :coffee:
