Amiga 1000 (US - NTSC)

UPDATE: I have replaced the floppy drive with a working drive. I have also repaired the power LED. Will also include a copy of KS 1.3 floppy.

Cleaning out my spares! Up for sale is a rescued North American NTSC Amiga 1000. I have taken this apart and cleaned it thoroughly. The Amiga works! However...


The Good:

• Amiga works and is very clean.
• Power supply works and outputs proper voltage.
• RGB, composite, audio, and floppy ports tested.
• Side expansion bus tested and works.
• Front memory expansion works.
• Internal drive interface works.
• Floppy drive works!
• Case has generally good color.

The Bad:

• Floppy LED does not work.
• Power supply fan sometimes makes a rattle when first powered up cold. Rattle goes away after 1-2 minutes.

The Ugly:

• The case has some scratches on top.
• Front case has bleached-out Amiga logo with a dimple (suspect sun or peroxide damage?)
• Case has a hole in the back and some remaining permanent ink.
• The RF shielding was rusted -- I have soaked in vineger and sanded and removed most of the rust.
• Missing side cover.
• Missing half the screws.

Asking $100 USD + shipping. I'm in the US, so expect international shipping to be upwards of $80 USD. No cables included -- just the 1000 + KS 1.3 floppy.

Picture time!


Motherboard (top):
https://dl.dropboxusercontent.com/u/...0/IMG_1332.JPG


Motherboard (bottom):
https://dl.dropboxusercontent.com/u/...0/IMG_1333.JPG


Boots from floppy emulator (Aaargh!):
https://dl.dropboxusercontent.com/u/...0/IMG_1334.JPG


Top RF:
https://dl.dropboxusercontent.com/u/...0/IMG_1335.JPG


Front (notice scratched on top and faded logo):
https://dl.dropboxusercontent.com/u/...0/IMG_1336.JPG


Right side:
https://dl.dropboxusercontent.com/u/...0/IMG_1337.JPG


Back (notice hole):
https://dl.dropboxusercontent.com/u/...0/IMG_1338.JPG


Left side:
https://dl.dropboxusercontent.com/u/...0/IMG_1339.JPG


Top with flash:
https://dl.dropboxusercontent.com/u/...0/IMG_1340.JPG

Interested

Once well-packed, you're looking at about $80 USD for shipping to the UK.

Withdraw for now

Declare interest! How much the shipping cost to Hungary?

Edit: Withdraw interest pending shipping costs, sorry.

I cannot get a good estimate to Hungary for some reason. Shipping to neighboring countries is around $100 USD, so I would expect it to be around $100 USD.

Anywhere close to MI, and anyone know how hard it is to find a working US keyboard?


Sent from my iPhone using Tapatalk Pro

Interested. let me just do some research..

Edit: Withdrawing interest, sorry. I think I'll keep looking for a PAL unit.

Interested next in line
Shipping to Sweden?

Hi Matt, Interested, shipping cost to CT?

Sent from my SM-G930P using Tapatalk