Printable View
Flashpath SM card reader allows you to access your SM card via a Floppy disk drive on a PC
£1.50 + Postage
http://www.imnogeek.co.uk/various/In...flashpath1.jpg
http://www.imnogeek.co.uk/various/In...flashpath2.jpg
http://www.imnogeek.co.uk/various/In...flashpath3.jpg
Gary
If they only made an Amiga version of the software...:overactor:
Price dropped to £1.50 + postage
Price drop again
£1.00
hmmm very tempting =)
can this work in DOS my friend?
I have had a google and have seen claims to be able to do this, but the manual does not mention it.
Drivers for win98 2k NT4 are on the disk and it also works on various Macs
Gary
Don't need this, I did not know it existed:D
Il bite, would be VERY handy if it can work with some old Mac's. :)
Hope this helps, taken from the manual on the disk.
Quote:
To use FlashPath on a PC, you need the following hardware and software:
•
FlashPathworks on an internal 3-1/2 inch floppy disk only (1.44MBdrive or a Japanese
3 mode drive). FlashPath is not designed to work with an external floppy drive, a USB
floppy drive, a floppy disk drive connected by a PC card, or a 120MB high capacity
floppy disk drive.
•
A personal computer (PC) (Intel x86 - 486 or Pentium class) with a hard disk drive. For
Windows 2000 or Windows Me, a Pentium 133 mhz CPU or better is required.• Microsoft Windows 95/98/Me/NT 4.0/2000.
Quote:
To use FlashPath on a Mac, you need the following hardware and software:
•
Quote:
PCI-based Power Macintosh or PowerPC-based PowerBook.
•
Mac OS 8.6, 9.04, or 9.1.
•
Hard Disk with 1 MB or more free space.
•
SmartDisk or other external USB floppy disk drive. FlashPath does not work on internal
floppy disk drives on Macintosh computers.
•
SmartMedia - 2MB to 64MB.
•
File Exchange or PC Exchange enabled (part of the Mac OS). If you have deleted this
software, you can replace it from your software recovery disk(s).
thanks for the info ING, but I think our resident tokyorace has a need so i shall boweth out =)