Support Gotek AMIGA 500 and 500+ printed in 3D

Printable View

Show 50 post(s) from this thread on one page

5th July 2017, 21:00
cocomocho

Support Gotek AMIGA 500 and 500+ printed in 3D

Full support Gotek for AMIGA 500 and 500+ printed with ABS plastic white, I only have this unit printed, but I can print many more units. It would make a list of interested and as they are going to have the units printed, they would be sent to each person. Support price is 8€ (before 20€) + shipping, Paypal.

http://i.imgur.com/UlN1RQe.jpg

http://i.imgur.com/fzElJTi.jpg

http://i.imgur.com/FFWxlcG.jpg

Interested:

sirlemonhead ------- 1 piece ------- Payment ------- Printed -------- Send
corigon ------------ 2 pieces ------ Payment ------- Printed -------- Send
jcarvalho ---------- 1 piece ------- Payment ------- Printed -------- Send
kinchan------------ 2 pieces ------ Payment ------ Printed --------- Send
botialoach --------- 1 pieces ------ Payment ------- Printed ------- Send
cercamon --------- 2 pieces ------ payment ------- Printed ------- Send
Nidunite ----------- 1 piece ------- payment ------- Printed ------- Send
Starglider --------- 1 piece -------- payment ------ printed -------- Send
AndrewM --------- 1 piece -------- payment ------ printed -------- Send
6th July 2017, 14:46
cocomocho

price drop!!
6th July 2017, 15:44
mrr19121970

are you able to produce at a higher resolution ?
6th July 2017, 15:50
cocomocho

Quote:

Originally Posted by mrr19121970

are you able to produce at a higher resolution ?

If, although it is at a higher resolution, 0.15mm the maximum resolution I can do is 0.1mm, they have 100% filler to make it resistant.
6th July 2017, 18:43
CrazyBob

With 50% infill it's strong enough and 0.1mm gives a nice finish.
These look good too :thumbsup:
10th July 2017, 12:36
cocomocho

up!!
10th July 2017, 13:59
davideo

Quote:

Originally Posted by cocomocho

up!!

Again time for another de-bump.
10th July 2017, 15:01
cocomocho

Quote:

Originally Posted by davideo

Quote:

Originally Posted by cocomocho

up!!

Again time for another de-bump.

i´m sorry :(
25th July 2017, 18:31
cocomocho

Still for sale
26th July 2017, 01:49
cercamon

Can you show us a picture of a mounted gotek unit in an A500? Does your project still needs cuts in the top of the Amiga case? Thanks.
26th July 2017, 02:01
cocomocho

Quote:

Originally Posted by cercamon

Can you show us a picture of a mounted gotek unit in an A500? Does your project still needs cuts in the top of the Amiga case? Thanks.

Inviato dal mio iPad utilizzando Tapatalk

Tomorrow I show a demonstration of how it would be in a case that I have, I do not currently have any Gotek, but to see how it would look. There is no need to cut anything on the top of the computer case :)
28th July 2017, 13:04
cocomocho

Added 2 more photos
29th July 2017, 09:46
SalvoB

Intresting, please write me shipping costs and I'll think about it
29th July 2017, 10:25
kaosboss

interested. let me know the shipping cost
18th August 2017, 16:13
sirlemonhead

Interested too, if you can also let me know shipping cost to Ireland.
28th August 2017, 23:32
cercamon

Thank you for the pictures. I'm not sure you can still operate on buttons or plug in a usb stick with the gotek drive in and the top case closed. Did you keep these issues into consideration when you designed the plastic crate? Thx

Inviato dal mio iPad utilizzando Tapatalk
29th August 2017, 08:11
fabbie54

Nice. Have you considered doing the same for the A2000, that covers the (larger than usual) floppy bay? Typically, people have been using 3D printed fillers with Goteks to fill the gap.
29th August 2017, 13:36
jcarvalho

Interested pending shipping costs to Portugal
Interested also for A2000 when ready
Enviado de meu Redmi Note 3 usando Tapatalk
29th August 2017, 22:08
warr8or29

Interested, what's the shipping cost to france please ?

Envoyé de mon SM-T580 en utilisant Tapatalk
3rd September 2017, 15:01
cocomocho

If in fact it is designed so that you can press the buttons and can put the pendrive without problem, I have already sold many pieces of these and everything well, the problem is that I ran out of stock gotek and I could not take a picture with one installed but it fits well :).

Forgive me for not answering before, I have been a few weeks on vacation and I have not been able to answer the messages.

- - - Updated - - -

Quote:

Originally Posted by fabbie54

Nice. Have you considered doing the same for the A2000, that covers the (larger than usual) floppy bay? Typically, people have been using 3D printed fillers with Goteks to fill the gap.

Yes, I have a filling made for the gap between the gotek and the casing.
3rd September 2017, 22:50
cocomocho

Quote:

Originally Posted by sirlemonhead

Interested too, if you can also let me know shipping cost to Ireland.

Payment Received!!! thanks
4th September 2017, 08:35
corigon

Interested in 2 pieces! PM to follow!
4th September 2017, 14:17
cocomocho

Quote:

Originally Posted by corigon

Interested in 2 pieces! PM to follow!

Payment Received!! thanks! :D
6th September 2017, 20:58
jcarvalho

funds sent for one piece, will pm with details
6th September 2017, 23:51
cocomocho

Quote:

Originally Posted by jcarvalho

funds sent for one piece, will pm with details

Payment Received!!! Thanks!!!
16th September 2017, 13:44
jcarvalho

@cocomocho When do you start to send the items?
16th September 2017, 20:19
cocomocho

Quote:

Originally Posted by jcarvalho

@cocomocho When do you start to send the items?

Hello!! on Monday I already do all the shipping :)
21st September 2017, 13:14
cocomocho

@corigon and @jcarvalho send pieces ;)
27th September 2017, 09:32
jcarvalho

Item arrived and tested. Very nice fit in A500 case, no need to cuts. Easy access to the gotek buttons. Positive feedback left!
Thanks cocomocho!

Can you show some pics of the A200 filler?I gave a gap bellow the gotek in the A2000 case due to the mounting spacers. Thanks again
27th September 2017, 13:29
kinchan

Interested in 2 pieces! PM to follow!
27th September 2017, 14:19
kinchan

Payment and delivery address sent by PM

Sent from my SCV33 using Tapatalk
27th September 2017, 14:42
cocomocho

Quote:

Originally Posted by kinchan

Payment and delivery address sent by PM

Sent from my SCV33 using Tapatalk

Payment Received!!! thanks!! :D

- - - Updated - - -

Quote:

Originally Posted by jcarvalho

Item arrived and tested. Very nice fit in A500 case, no need to cuts. Easy access to the gotek buttons. Positive feedback left!
Thanks cocomocho!

Can you show some pics of the A200 filler?I gave a gap bellow the gotek in the A2000 case due to the mounting spacers. Thanks again

This would be it, :)

https://i.imgur.com/jS7LtoS.jpg
28th September 2017, 13:26
corigon

Package received, thank you! Feedback left!
17th October 2017, 08:51
botialoach

Interested in one piece for Full support Gotek for AMIGA 500 and 500+, pending shipping cost to Cyprus.
18th October 2017, 18:05
botialoach

Quote:

Originally Posted by botialoach

Interested in one piece for Full support Gotek for AMIGA 500 and 500+, pending shipping cost to Cyprus.

Payment just been made, for one bracket support for Amiga 500 and one bracket support for Atari 1040ST.
18th October 2017, 18:34
cocomocho

Quote:

Originally Posted by botialoach

Quote:

Originally Posted by botialoach

Interested in one piece for Full support Gotek for AMIGA 500 and 500+, pending shipping cost to Cyprus.

Payment just been made, for one bracket support for Amiga 500 and one bracket support for Atari 1040ST.

Payment Recieved!!! thanks!!!! :D
19th October 2017, 09:16
cercamon

Interested in one support for A500/A500+. Can you please provide shipping cost to Switzerland via PM? Thanks.
19th October 2017, 20:59
cercamon

Payment sent for two A500 supports. Shipping cost included.
19th October 2017, 21:03
cocomocho

Quote:

Originally Posted by cercamon

Payment sent for two A500 supports. Shipping cost included.

Payment Received!!! thanks!!!! :D
28th October 2017, 11:37
cercamon

Quote:

Originally Posted by cocomocho

Quote:

Originally Posted by cercamon

Payment sent for two A500 supports. Shipping cost included.

Payment Received!!! thanks!!!! :D

Any news about shipping, cocomocho? Thanks.

Inviato dal mio iPad utilizzando Tapatalk
31st October 2017, 18:17
botialoach

Supports arrived, very useful. Leaving feedback
10th November 2017, 11:26
cercamon

Envelope received. All good. Thanks. Leaving positive feedback.
5th December 2017, 21:53
Nidumite

Hi could I have one printed for an A500 Plus
6th December 2017, 09:45
Springycz

I am interested as well. Is it possible to choose a color? (preferably white)
7th December 2017, 18:41
Nidumite

Payment sent
9th April 2018, 15:33
cocomocho

still available
9th April 2018, 20:41
AndrewM

To confirm, this will allow me to use gotek inside Amiga 500 without drilling/cutting the case? Can you quote shipping to US?
Thank You
18th April 2018, 07:29
Starglider

Interested in one. PM sent.

Thanks!, Starglider aka ԹҽɾíƒɾɑϲԵíϲ's RҽԵɾ๏ RҽϲíԹҽs
🕹️ http://youtube.com/perifractic
🕹️ http://patreon.com/perifractic
18th April 2018, 19:57
cocomocho

Quote:

Originally Posted by Starglider

Interested in one. PM sent.

Thanks!, Starglider aka ԹҽɾíƒɾɑϲԵíϲ's RҽԵɾ๏ RҽϲíԹҽs
️ http://youtube.com/perifractic
️ http://patreon.com/perifractic

Payment Received!! thanks!!
18th April 2018, 20:10
AndrewM

Quote:

Originally Posted by cocomocho

Quote:

Originally Posted by Starglider

Interested in one. PM sent.

Thanks!, Starglider aka ԹҽɾíƒɾɑϲԵíϲ's RҽԵɾ๏ RҽϲíԹҽs
️ http://youtube.com/perifractic
️ http://patreon.com/perifractic

Payment Received!! thanks!!

cocomocho - I can see that you're confirming order with "Payment Received" messages. Can you confirm my order that was placed on April 9? Payment was sent the same day. Thank You.

Show 50 post(s) from this thread on one page