@Wasagi
Try with a rev2B !
Another guy here (Foul) had some issues with his 1D4 + BlizzardPPC...
Printable View
@Wasagi
Try with a rev2B !
Another guy here (Foul) had some issues with his 1D4 + BlizzardPPC...
Have tried on 1d1 and 1d4. Do not have a 2b
Quote:
Originally Posted by Cosmos
I get the Wasagi's card yesterday...
With the 040, no boot sometimes here too : with 2B and 1D.4
I changed by a 060@64 : still random boot... And the 060 is at 7 Mhz with Scout ?! :o
Some prgs crash (WhichAmiga...) and guru sometimes...
603e coeffs were desolderd before me, and the two quartz too...
I'm searching to fix... :thumbsup:
Very strange :( what is 603 coeffs and is there any reason why these may have been soldered?
Also what is 7mhz with scout?
This card has been a pain
Quote:
Originally Posted by Cosmos
---------- Post added at 15:32 ---------- Previous post was at 15:31 ----------
Thanks for the work cosmos :)
---------- Post added at 16:59 ---------- Previous post was at 15:32 ----------
Does anyone here have any ideas now that the card is in the hands of a professional?
Cosmos has inspected the board and has ruled out bad solder joints on the edge connector.
Today is a sad day :(
at a guess the 7mhz is the speed of a 68000 in an A500 or A2000 where your 060 should be in the region of 50Mhz+
thats just my guess though :edit: "I changed by a 060@64" so that be 64Mhz
me too want to know what 603 coeffs are ??
at least progress is been made now, I have every thing crossed for you Wasagi that cosmos can fix it for you
I have every confidence, that if anyone can fix cosmos can. I have looked at all of his blog entries, he is very skilled :) Some of his fixes amaze meQuote:
Originally Posted by cosmicfrog
I have found out that the Coeffs is the multiplier. It seems the PPC is clocked at 3.5 x 60 which puts it 210mhz, so I think this means the card is overclocked. If it is then I am a little disappointed as it was advertised as a 200mhz PPC. the card has also had some work done to it, but both Cosmos and I are unsure at the moment if this is the cause.Quote:
Originally Posted by cosmicfrog
What puzzles me is that the card will boot 'sometimes' and not others. I was able to get it to boot when I held it in place with a wooder spatula, putting force on one end. Surely if it boots then there is nothing seriously wrong with the card? I am desperate for an answer as this card cost me a lot of money and I havent had it working since day 1!
i confirm :DQuote:
Originally Posted by Cosmos
We have confirmed its not a board revision issue.Quote:
Originally Posted by Fouli confirm :DQuote:
Originally Posted by Cosmos
i just confirm i got probs with my PPC .. don't spoke about motherboard rev number ;)