Need BlizzardPPC 1.3 firmware updater
ok hitting my self with hammer
I tried flash my blizzard PPC card to latest firmware so I can use my G-rex Pci thing
But it did`t work leaveing me with no PPC and no memory
so I`m after the flash tool 1.3 or less in a vain attempted to bring it back to life
The one that Ribbits Frist Ribbits Loudest :rainbow::boing::inlove:
If it dos`t work Hit it with a Hammer, If that dost work get a bigger Hammer, If that dos`t work get the gas axe out :mad:
Up Front and Central Takeing flack as usual so the rest of you can do that pincer movement
here:
http://phase5.a1k.org/
I suggest to use 44.69 vesion.
And flash version has nothing to do with Blizzard PPC hardware version.
There are at least 3 versions of Blizzard PPC boards: rev0, rev1 and rev2.
Only rev2 hardware is working with G-REX.
This is the example of rev2 board:
http://www.amibay.com/showthread.php?t=7617
Please have look what whichamiga is reporting
I've never seen rev1 by the way...
I`ll try that one tommor as I don`t think i have already
typical I got a rev 0 board
might be looking for some serious hardware help next week
The one that Ribbits Frist Ribbits Loudest :rainbow::boing::inlove:
If it dos`t work Hit it with a Hammer, If that dost work get a bigger Hammer, If that dos`t work get the gas axe out :mad:
Up Front and Central Takeing flack as usual so the rest of you can do that pincer movement
>I suggest to use 44.69 vesion
Why ??
Because I've installed latest version with OpenPCI support on Cyberstorm PPC and CyberVision PPC was not working any more.
Never checked this behavior on Blizzard PPC + BVision, but I think it will be the same - BVision will refuse to work.
Seems that last version is suitable for G-REX setup only.
Ok !
Tested by me :
MK III with v44.71 + CVPPC = working
BlizzPPC rev? with v44.71 + BVision = working
tried, still the same .....
error I get after it complains about the clock not been set
so I set clock and use force option, every optimistic
I get
Emb Prog: sector 0 is protected
Error 13:
run for your life its the end of the world ..... or some such
can anyone rescue this for me I`ve run out of things I can try
The one that Ribbits Frist Ribbits Loudest :rainbow::boing::inlove:
If it dos`t work Hit it with a Hammer, If that dost work get a bigger Hammer, If that dos`t work get the gas axe out :mad:
Up Front and Central Takeing flack as usual so the rest of you can do that pincer movement
aaarrggghhh... Same prob here : http://cosmosamiga.blogspot.com/2010...rdppc-aie.html
You must desolder the eeprom, and flash it with a programmator !
but that is well beyond my limited skill set
I better start saving again
if/when I have some cash would u be able to reflash it for us ?? plz plz plz + extra ribbits
oh and good luck with gfx.library cosmos
The one that Ribbits Frist Ribbits Loudest :rainbow::boing::inlove:
If it dos`t work Hit it with a Hammer, If that dost work get a bigger Hammer, If that dos`t work get the gas axe out :mad:
Up Front and Central Takeing flack as usual so the rest of you can do that pincer movement
Unfortunately Cosmos is right...
I've had the same issue.
To be sure that it will never happen again it's better to replace AMD29F040B (flash memory IC) by new one. Of course you have to program it first.
Posting Permissions
Reply With Quote
