A600 Repair
Hi,
Is there anyone here in the UK who would be willing to repair my 2 A600 mobos?
Both rev 1.5 PAL. Basically one I *think* just needs the caps replacing (I have them, just not the confidence in my soldering skills...).
And the other, when you boot it give a yellow and black flashing screen (with caps lock light on permanently!)
Is that enough info to give me an approximate cost?
Any help would be appreciated!
Thanks!
[B][SIZE=3]Craggus2000[/SIZE][/B]
[SIZE=1]"If it ain't broke, break it and make it better!"[/SIZE]
A600 repair
Do not send them to Analogic Computers (UK) Ltd of Kingston upon Thames, I had them attempt a repair on a A1200 once and my brother sent them his A4000 they were no better when they came back from them.
I thought about Amigakit, but called them and they said it could be a few months before they could look at themOriginally Posted by coze
[B][SIZE=3]Craggus2000[/SIZE][/B]
[SIZE=1]"If it ain't broke, break it and make it better!"[/SIZE]
hikey on here delivered an A4000 repaired board to me, at a reasonable price.
Proud on the classics: A1000-A500-A2000-A600-030-A1200 PPC -A3000D(basic)-A4000D(060)
Mac Mini 1.45 ghz 1 G RAM MORPHOS 2.6
Pentium 3 1.4 ghz 512 sdram AROS
That was in regard to finding fault / repairing.I thought about Amigakit, but called them and they said it could be a few months before they could look at them
We can change the caps with a fairly quick turn around.
But the service linked to does'nt extend to repairing anything.
Its simply what it says "A capacitor replacement service".
On news of PSPUAE update on DCEMU came this reply, lol.
[QUOTE=djk21108]this will sure make that horace guy happy....[/QUOTE]
Apologies FOL, I stand corrected.
[B][SIZE=3]Craggus2000[/SIZE][/B]
[SIZE=1]"If it ain't broke, break it and make it better!"[/SIZE]
@craggus2000
You said to me that you have not recieve the new caps, but : "Basically one I *think* just needs the caps replacing (I have them, just not the confidence in my soldering skills...)"
So, what ??
Hi Cosmos,
I have PM'd you. I was pre-empting receiving them. I should stated I have ordered them. Apologies for this.
[B][SIZE=3]Craggus2000[/SIZE][/B]
[SIZE=1]"If it ain't broke, break it and make it better!"[/SIZE]
Braintree? Im not too far away in kelvedonHi Cosmos,
I have PM'd you. I was pre-empting receiving them. I should stated I have ordered them. Apologies for this.
Posting Permissions
