SOLD OUT
I have a few pre-assembled Pi1541 hats with a very nice design by Tor-Eirik Bakke Lunde for sale. Instead of a case, it makes use of three PCBs (the main circuit board, a faceplate and a backplate) that emulate a pile of 5.25 diskettes, but smaller. Dimensions are 10x10x3cm,
They are of the 'B' variant, so they can be chained to other devices in the bus. They are completely assembled and tested. You only need a screwdriver to put a raspberry pi in it, install an sd card with the appropriate image from https://cbm-pi1541.firebaseapp.com, edit the options.txt file as per Tor-Erik's instructions and you are good to go. If you have any problem making it work, please post on this thread.
You'll need a 5 volts, 2.5A or higher adapter with a 5.5*2.1, internal positive, barrel. An usb to barrel cable is included, so you can use a regular USB PSU. I can also provide 5V 3A, EU plug adapter on request for an extra 5€ 3€.
Price is 27€ + P&P per unit. Paypal F&F only. I offer full refund if the unit is not working. You have one week after arrival to test it. I also accept returns, P&P excluded.
Raspberry Pi not included!
Shipping
IMPORTANT: Due to the COVID-19 situation I'm not currently able to ship with reasonable costs to Australia and, probably, other countries.
Shipping to Europe, EU or otherwise, is 12€.
Other countries, please ask, I'll give you the cheapest options based on your location.
I have a few pre-assembled Pi1541 hats with a very nice design by Tor-Eirik Bakke Lunde for sale. Instead of a case, it makes use of three PCBs (the main circuit board, a faceplate and a backplate) that emulate a pile of 5.25 diskettes, but smaller. Dimensions are 10x10x3cm,
They are of the 'B' variant, so they can be chained to other devices in the bus. They are completely assembled and tested. You only need a screwdriver to put a raspberry pi in it, install an sd card with the appropriate image from https://cbm-pi1541.firebaseapp.com, edit the options.txt file as per Tor-Erik's instructions and you are good to go. If you have any problem making it work, please post on this thread.
You'll need a 5 volts, 2.5A or higher adapter with a 5.5*2.1, internal positive, barrel. An usb to barrel cable is included, so you can use a regular USB PSU. I can also provide 5V 3A, EU plug adapter on request for an extra 5€ 3€.
Price is 27€ + P&P per unit. Paypal F&F only. I offer full refund if the unit is not working. You have one week after arrival to test it. I also accept returns, P&P excluded.
Raspberry Pi not included!
Shipping
IMPORTANT: Due to the COVID-19 situation I'm not currently able to ship with reasonable costs to Australia and, probably, other countries.
Shipping to Europe, EU or otherwise, is 12€.
Other countries, please ask, I'll give you the cheapest options based on your location.
Attachments
Last edited: