Various Amiga Systems and Accelerator Cards

Status
Not open for further replies.

Bunta714

Member
Rating - 100%
34   0   0
Joined
Mar 19, 2016
Posts
215
Country
USA
Region
California
Edit 3/23: Fixed 1260 photo link
Edit 3/26: Updated some details on A500 Vampire; Added shipping caveat
Edit 3/29: Some items are now listed for sale elsewhere
Edit 4/26: A2000 taken down. Will relist components for a split sale.
Edit 4/28: Issues found with A600s when re-testing. Will troubleshoot and repost later.
Edit 5/04: Split A2000 prices and photos added.

Hi all,

I sold off a bunch of my Amiga stuff a while back and now I'm forced to let go of the rest of the lot.
I've included a bunch of photos, but if there are any specific requests, please let me know and I will do my best to provide any information I can.


  • Shipping (US and/or Worldwide) is possible for all but the largest items. I will mark each item separately.
  • *WARNING* Worldwide shipping is looking to be unbelievably expensive ($200-$300) for larger items. Even for smaller things it is coming out to be over $100 to most places.
  • I am located in the Orange County region of California (close to Disneyland)
  • Shipping costs not included in price and are to be paid by buyer.
  • Any payment fees are not included in the price and are to be paid by buyer.
  • Payment via PayPal friends and family is preferred.



A2000 Split:
Images of the parts working in the system are still here: https://imgur.com/a/8nXxwUV


Sold to Niezgodka
GVP A3001 (A3050) (Impact A3001) 030 CPU and 68882 FPU accelerator running at 50Mhz with A2000-RAM32 attachment with 8MB of RAM autoconfigured (12MB of RAM installed) - Works perfectly
imgur.com/a/tMrpxAh
Price: $375 USD (was $400, $450)


Sold to Niezgodka
Great Valley Products EGS Rev 3 Zorro II/III RTG graphics card (2MB)
imgur.com/a/kWL8wFl
Price: $175 USD (was $200)


Sold to Niezgodka
AGA-2000 flicker fixer - Works perfectly
imgur.com/a/Fe8DKxn
Price: $175 USD (was $200)


Sold outside Amibay
Micro R&D Bigfoot 2000 replacement power supply (300 watt) - Works perfectly
imgur.com/a/dYHKNYZ
Price: $100 USD


AT Bus Clone Zorro II IDE adapter (no card, adapter, or software included) - Works perfectly
imgur.com/a/Ko7f5lO
Price: $50 USD


Amiga 1080 Monitor (Local Pickup only)
https://imgur.com/1i8ZQvD
PRICE: 300 USD
The casing is a little scuffed, but otherwise works great.


Sold to DoctorXerox
Amiga 4000 (A4000D) - NTSC (US shipping only)
https://imgur.com/a/WZt1QzG
PRICE: 1400 USD
The motherboard has been recapped and repaired, and the battery replaced.
The System comes with a fully working A4000 keyboard and an amiga mouse.

Specs:
  • 2MB chip RAM
  • 16MB RAM on the motherboard
  • 256MB Z3 RAM from the BIGRAM+ board
  • A3640 CPU card with a 68060 CPU adapter and 68060 CPU/heatsink (will include the original 68040 upon request)
  • KS 3.1 (modified version to work with 060 CPU/adapter)
  • MNT VA2000 video card with HDMI output (no HDMI cable included)
  • MNT VA2000CX video card expansion
  • 1 Internal IDE CF card reader with rear access (currently connected to IDE and power; no software or CF card installed)
  • Floppy disk drive
  • 1 internal IDE CF card reader with front panel access (not currently connected to IDE or power)
  • 1 CD-ROM drive (not currently connected to IDE or power; I was having issues with the LG drive, so it was swapped out for a different MSI drive)



Sold to apolkosnik
Amiga 3000 (A3000D) - NTSC (US shipping only)
https://imgur.com/a/vjYdAhT
PRICE: 800 USD
The system comes with a fully working keyboard and 2-button pregnant mouse.
The system runs well but has the following issues:
  • Damage due to battery leakage (see photos). The battery acid has been neutralized, but I have not had the time to do any repairs to the board or chips around it.
  • The disk drive works fine, has a replacement 3d printed button.

Specs:
  • 2MB chip RAM
  • 16MB RAM via the RAM adapter with a stick of 32MB RAM installed.
  • KS 3.1
  • SCSI2SD adapter (no card or software included)
  • Floppy drive




Amiga 2000 (A2000D) (Local Pickup only)
https://imgur.com/a/8nXxwUV
Price: 1200 USD

The system works beautifully and includes an Amiga keyboard and tank mouse.
The thing is huge and heavy, so I am a bit hesitant to ship even to US only, but if no one can pick it up locally, I will consider US shipping.

Specs:
  • 2MB chip ram (Mega Chip)
  • GVP A3001 (A3050) (Impact A3001) 030 CPU and 68882 FPU accelerator running at 50Mhz with A2000-RAM32 attachment with 8MB of RAM autoconfigured (I think it has 12MB or 16MB total installed)
  • AT Bus Clone Zorro II IDE adapter with rear mounted CF adapter (no card or software included)
  • Great Valley Products EGS Rev 3 Zorro II/III RTG graphics card (2MB)
  • AGA-2000 flicker fixer in video slot
  • Micro R&D Bigfoot 2000 replacement power supply (300 watt)




Issues found when re-testing the 600s. Will troubleshoot and repost

Amiga 600 (Worldwide shipping, for sale elsewhere as well)
https://imgur.com/a/InxaEic
Price: 700 USD

Recapped and works well.

Specs:
  • 1MB chip RAM expansion (2MB total)
  • Vampire 600 V2
  • Recapped
  • KS 3.1
  • Internal floppy drive


Amiga 600 (Worldwide shipping, for sale elsewhere as well)
https://imgur.com/a/zwJQzRk
Price: 350 USD

Not yet recapped but works well.

Specs:
  • 1MB chip RAM expansion (2MB total)
  • Internal IDE HDD (no software included)
  • KS 2.05
  • Internal floppy drive


Sold elsewhere
A500 - PAL (US shipping only)
https://imgur.com/a/AefXWHM
PRICE: 400 USD

The system works beautifully and includes an Amiga tank mouse.

Specs:
  • Kipper2K 8MB RAM and IDE > CF adapter (no card or software included)
  • Floppy disk Drive
  • Mechanical Chicken Lips (C=) key keyboard



Sold elsewhere
A500 +Vampire - NTSC and PAL (US shipping only, for sale elsewhere as well)
https://imgur.com/a/voBXDGC
PRICE: 600 USD

The system works beautifully and includes an Amiga tank mouse.

Specs:
  • A500 Vampire V2+
  • 512 KB RAM expansion card
  • Modded to allow expansion RAM to be added to chip RAM via a toggle switch
  • Modded to allow switching between NTSC/Pal via a toggle switch
  • Floppy disk Drive
  • Mechanical Chicken Lips (C=) key keyboard



Sold to Niezgodka
A1000 - PAL (US shipping only)
https://imgur.com/a/8ef2nHR
PRICE: 400 USD

The system works well. There is quite a bit of yellowing on the case. This is an early PAL model that still has the daughterboard usually only found in the NTSC A1000s and the “Commodore” logo on the front. An A1000 keyboard and Amiga tank mouse are included.

Specs:
  • 256K front RAM expansion
  • A500IDE -> CF adapter for side expansion port (128MB card included, no software)
  • Floppy disk drive
  • Modern Pico PSU installed with adapter (no power brick included, but can be purchased online easily)



Sold to MadMungo
Apollo 1260 A1200 Accelerator (Worldwide shipping)
https://imgur.com/a/yaa7KeV
PRICE: 800 USD
Upgraded from a 1240 by a user on Amibay. Works great.

Specs:
  • 68060 CPU @ 80 MHz
  • 64 MB of RAM installed
  • Cooling fan



Sold to CourtneyBlush
Blizzard 1230 w/ SCSI + RAM adapter (Worldwide Shipping)
https://imgur.com/a/7Vnoqi4
PRICE: 500 USD
Works perfectly.

Specs:
  • 192 MB of RAM (64 MB on the accelerator, 128 MB on the SCSI adapter)
  • 50 MHz 68030 CPU



Sold to philip930
Amiga CD32 Console - PAL (Worldwide shipping)
https://imgur.com/a/RPHxkoG
PRICE: 300 USD
The system has been recapped and works well. The RF adapter has been removed and the console has been modded for RGB output.
The system reads original discs perfectly and reads burned discs well, depending on CD-R quality.
The console has some small cosmetic blemishes that do not affect operation.

Comes with:
  • Generic Power Supply (US) or original 220V power supply
  • CD32 Competition Pro Controller and Boomerang CD32 controller
  • RGB SCART cable
  • Extra CD Laser
 
Last edited:
Sorry for the broken image links!
I think I fixed the 1260 link and I will reply to all PMs in the morning.
 
Hi. Just want to let you know that I will be handling of forwarding his a1000 for Mariuszk844. He should explain it via pm.
Btw, nice collection you are getting rid of.
 
Thanks for the interest, all.

Replies to all PMs sent. I will be getting shipping estimates as soon as possible.
 
I apologize for the delay. I am sending out the shipping estimates now and should have them all figured out by this evening (PST).
 
With sadness i withdraws interest for blizzard1230 (insufficient funds) I wish the seller a success in selling.
 
Hi, Interested in Blizzard 1230 w/ SCSI + RAM adapter (Worldwide Shipping)
 
Status
Not open for further replies.
Back
Top Bottom