Sold 060 Turbo card 100Mhz for the GBA1000

Status
Not open for further replies.

gseb

Well-known member
Rating - 100%
279   0   0
Joined
Apr 3, 2012
Posts
1,593
Country
Germany
Region
BW
"SOLD"

Selling this beauty....


I am selling a Turbo Board for the GBA1000, this card has 128MB and is perfectly working at 100Mhz.
The card will be send without the CPU/heatsin/fan. I will give with the card the power cable.

This card require a 68060 rev6 that run fine @100mhz. You will have to install yourself a heatsin/fan on the CPU.

This card has the last Async Firmware from Matze and you MUST put the 50Mhz Quartz on your GBA1000 to get the card working.
If you don't want this, I can flash the card for you with the classic firmware, just ask for it.

Again, no cpu, no heatsink/fan.

What you will get is on the picture (+ the power cable)

Asking 200€ + Shipping fee. Paypal as gift or +4%. BIC/IBAN also possible.

IMG_4981-2.jpgIMG_4970.jpgIMG_4969.jpgIMG_4971.jpgIMG_4972.jpgIMG_4973.jpgIMG_4974.jpg






 
Last edited:
Somehow the PCB looks familiar to me, Seb ;)
Awesome soldering. The new owner will be delighted, I'm sure.
 
Status
Not open for further replies.
Back
Top Bottom