Sold 040->060 adapter for warp engine, A3640 etc

Status
Not open for further replies.

screemo

Well-known member
Rating - 100%
337   0   0
Joined
Nov 24, 2017
Posts
1,382
Country
Denmark
Region
South Sealand, Naestved
All out, sorry.

As in title, for sale is 0 pcs (was 4) of 040->060 adapter with voltage regulator.

Suitable for running 060 cpus in 040 big box accelerators.

Please note 060 with fpu requires kickstart 3.1.4 or a custom rom that disables fpu on boot, as older kickstarts doesn't support it.

Price : 35 EUR per adapter (+ shipping 5 EUR untracked or 12 EUR tracked worldwide).

Pictures below.
dd486517f8166dcaf4258d56cfef46e7.jpg
b1d6142b52de2fa85201a66e6ad9012d.jpg
29cb84be4c33c6389eefad7fdf8e733d.jpg
 
Last edited:
I wasn't really planning to, but I can sell 4 in total. I have updated the post to reflect this.
 
Moving next in line tonight if nothing from milesunder or matt020. There's 2 pcs left.
 
perfect, thanks. can i just check that these will work with an A3000? They look to be pretty pretty low profile
 
Last edited:
just an A3640 - the plan is to use a rev6 060 at just 50mhz so heatsink and fan is not necessary.

I've got two other low profile adapters that will fit on a 3640 or WE in a 3000, but they're currently in use in other machines. So it's definitely possible with a sufficiently low adapter
 
just an A3640 - the plan is to use a rev6 060 at just 50mhz so heatsink and fan is not necessary.

I've got two other low profile adapters that will fit on a 3640 or WE in a 3000, but they're currently in use in other machines. So it's definitely possible with a sufficiently low adapter
I can measure the adapter, and you can figure out if it works?
 
that would be great, thanks

In my AA3000+ I would say from the bottom of the bottom pcb of the adapter to the top of the cpu edge it's about 1.3cm, and there's about 2mm gap between the top of the cpu and the bottom of the drive-bay.

PM now sent
 
Last edited:
Status
Not open for further replies.
Back
Top Bottom