Closed Need technical information

Status
Not open for further replies.

zano972

New member
Rating - 0%
0   0   0
Joined
Apr 27, 2021
Posts
1
Country
switzerland
Region
vaud
Hi all,

I have an Amiga 500 MB Revision 6A with only 512kb of Chip RAM. I want to add 512kb of RAM on the motherboard (it's possible because there are 4 empty slots to add just 4 x MB81C4256 chips on the MB). To do this I need to buy - with the MB81C4256 chips - 4 x capacitors, but I don't know the exact value (micro, Pico or NanoFarad) I have to order. I have looked at X A500 MB Revision 6A component layout diagrams but it's impossible to see/read the value of these 4 companions capacitors...

Is there here anybody able to give me this information ?

Thanks

NB: Please forgive me for my bad english language. I've tried to do my best...
 
Last edited by a moderator:
They are just standard single chip decoupling capacitors. 330nf is a bit on the high side. I would use 100nf ceramic capacitors. The voltage is not important, all ceramic capacitors are well above the Amigas voltages.

Bryce.
 
Status
Not open for further replies.
Back
Top Bottom