Found 4-Way buffered ide

Status
Not open for further replies.
Dear Steve,

Package received ok.

But I am afraid is not working or at least I do not know how to make it work.

It is very strange as the cables were already on and there was no problem to put them right.

But unfortunatey Amiga do not want to start booting.
It is stacked with a grey colour screen. Not even the rom screen with the diskette.
I have an Amiga 1200 3.0 with Blizzard 1230 50 Mhz 32 MB memory but even without the Blizzard no luck to make it work.
Without this amiga boots normally.

Please see the pictures below:
One with your cable:



and one with my cable
21012013174.jpg
21012013175.jpg
 
You have connected it back to front, that's why it does not work, you may have even damaged it now.

This is why I left cables connected so you would see which way to connect it.

It was tested & working.
 

Attachments

  • IDE.jpg
    IDE.jpg
    165.6 KB · Views: 0
  • a1200mbr2bbig.jpg
    a1200mbr2bbig.jpg
    100.8 KB · Views: 0
Feedback left too, I have PM'd you a scanned copy of the instructions this should help (y)
 
Status
Not open for further replies.
Back
Top Bottom