GBA1000 New board production (V4)

[kipper2k]

monny send for TSOP
2 x accidentally done

Hi,

I refunded the duplicate

[mjnurney]

I didn't notice the payment update - am I still ok to order one ?

Mike

[kipper2k]

I didn't notice the payment update - am I still ok to order one ?

Mike

yup.


To order a board and see payment options go to the first post of this thread.

Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html

link to picture of the sample board i ordered... http://www.kipper2k.com/topgb.jpg

[mjnurney]

Jolly good

---------- Post added at 23:02 ---------- Previous post was at 22:52 ----------

Payment sent

[kipper2k]

added Mjnurney to the list.





To order a board and see payment options go to the first post of this thread.

Order closing date is 2200 (CST) Wed March 13th 2013.

Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html

link to picture of the sample board i ordered... http://www.kipper2k.com/topgb.jpg

[CUF85]

added Mjnurney to the list.





To order a board and see payment options go to the first post of this thread.

Order closing date is 2200 (CST) Wed March 13th 2013.

Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html

link to picture of the sample board i ordered... http://www.kipper2k.com/topgb.jpg

@Kipper

Are the boards we are gonna get, have the parts needed written on the board? Because the illuwatar one has them. It's much easier to build it that way.

[kipper2k]

added Mjnurney to the list.





To order a board and see payment options go to the first post of this thread.

Order closing date is 2200 (CST) Wed March 13th 2013.

Link to ordering and mailing info... http://www.kipper2k.com/gb1000.html

link to picture of the sample board i ordered... http://www.kipper2k.com/topgb.jpg

@Kipper

Are the boards we are gonna get, have the parts needed written on the board? Because the illuwatar one has them. It's much easier to build it that way.

I'll check... i will supply a pdf with it nyway so you will be abe to see all the information at a glance (which is much easier)


Here is some pictures of my design of the video hybrid board (Rev 3)

I cant test it in my a500 as i don't have any sinlge line female headers (on order) and i cant be bothered to remove the one from the a500 and solder this one in untested so i will wait for the female headers to come before i test it. I'll sell these as kits or complete, they are such fiddly little buggers to solder.

The board can be soldered directly to the motherboard or in a 22 pin inline single socket

[CUF85]

@Kipper

Great job! Hope it works. How much $$ would these be?

[kipper2k]

@Kipper

Great job! Hope it works. How much $$ would these be?

Hmm, not sure, based on the time it takes mt to build them i would say $11 for complete tested... for a kit of parts/instructions i think $5 is a fair price

[DutchinUSA]

Forgive me for my ignorance but what exactly does the video hybrid do?