Closed MIDIMAN MM-401 breakout cable

Status
Not open for further replies.

AlexDroog

New member
Rating - 0%
0   0   0
Joined
Apr 4, 2014
Posts
3
Country
United States
Region
Massachusettes
I just bought a MIDIMAN MM-401 off ebay. It didn't come with the white 9 pin male serial breakout cable. I have looked everywhere for this cable to no avail.

Here is a picture.

140.jpg


Thank You
 
Last edited:
I don't own this card nor the cable, but it should be possible to make your own cable if you can't find an original one. Judging from pictures of the MM-401 it seems to me that all the necessary components are already on the ISA card, so the cable itself doesn't contain any chips.

Have a look at the official MIDI electrical specification here and then use a multimeter to determine the pinout of the connector. You should be able to find that out by examining the traces that go from the connector to the Sharp PC900 optocoupler and the various 220 Ohm resistors on the card.

Hope that helps!
 
Status
Not open for further replies.
Back
Top Bottom