?? i have only self soldered boards
?? i have only self soldered boards
My TapuinoMini PCB's have arrived too, and the design is working as expected.
I'll send you more than one from the second batch. Even I couldn't have one for myself from the first batch.Originally Posted by sweetlilmre
I'm still hoping someone is going to send me one of the mini boards, I'd like to get all variations
In the second batch i'll have more TapuinoMini's, because i'll make the design 10cm x 10cm so there will be 8 panelized TapuinoMini's instead of 2 in each PCB. This way i'll get 96 TapuinoMini's for 25 USD, very good deal.
Last edited by ozayturay; 2nd June 2015 at 14:58.
Thanks for reminding me a little waste of money ...I'm still hoping someone is going to send me one of the mini boards, I'd like to get all variations@sven1973 brilliant!
@ozayturay / @c64new who's going to send me a board?
-(e)
Unfortunately i got them before they were fixed ...
After having tried to divide just one without success, other PCBs are still ... twinned!
If you want them ... make a bargain: 2 in 1!
Last edited by c64new; 2nd June 2015 at 20:49.
|Vic20|C64|C64C|C64G|C64Aldi|SX64|C64DTV|C128|C128D|C128DCR|C16|Plus4|
|Amiga500|Amiga500+|Amiga600|Amiga1200|AmigaCDTV|Amiga1000|Amiga2000|
|Z80NE Nuova Elettronica|Spectrum +2|MSX2 Philips NMS8280 Digitize & Superimpose|
@c64new: I'm sorry to hear that. You missed with only one day, before i discovered about panelizing.
May be you can cut with a dremel to seperate the twins.Monday 6 Apr 2015 13:02: Board shared "lee made this board in order 2004767"
Tuesday 7 Apr 2015 9:51: Board shared "Antonello made this board in order 2004793"
BTW I can send you some from my second batch, so stay in touch with me.
Last edited by ozayturay; 3rd June 2015 at 10:31.
@ ozayturay
Do not worry, I was joking with sweetlilmre he wanted PCBs mini ...
Next time look a bit of time before ordering
I have tried using the Dremel but there is little space between the PCB's and then it takes little to go wrong! Then the PCB-vetronite is very abrasive and then destroys the blades of Dremel quickly ...
This is one of the 'cuts' (not too good):
Last edited by c64new; 3rd June 2015 at 14:03.
Maybe a metal ruler and a hobby knife/cutter can be used to cut partly into both sides after which they will break along that line?
A1200 (NOS) : 030 33MHz 128MB fast RAM (ACA1232) : Indivision AGA MkII : 8GB CF : RR USB : Ethernet
A600 #1 : 080 V2 : 128MB fast : 2MB chip : Indivision ECS : 32GB CF : RR USB : Ethernet | A600 #2 : 010 : 2MB chip
A500 : 68000 42MHz : 1MB chip : 8MB fast : 4GB CF | A500+ : 080 V2+ : 128MB fast : 2MB chip : 32GB CF
I tried that too ...
But it always ruins the corners!
The PCB not subtle
Can you put a photo of the front side?
Here the top side of the PCB:
It seems to me that here are some pin of the 'memory-reader' inverted ...
Would this type of tile cutter work in cutting pcbs?
http://m.homedepot.com/p/HDX-14-in-R...14X/203713610/
AMIGA 4000 060/50, AMIGA 1200 030/50, AMIGA 500, C128D, C128, C64C, C64, C16, Vic-20, Atari 520 STE, Atari 65 XE, Philips NMS-8250 MSX2, Sinclair Spectrum +3e, Sinclair Spectrum 48k, Amstrad CPC 6128, Amstrad CPC464, Oric Atmos, Apple Macintosh Classic, Apple IIGS, BBC Master, Memotech MTX500
Posting Permissions
Reply With Quote
