C
Cozzer79
Guest
Hi all,
I have a BPPC with SCSI, and a BVPPC - the BPPC appears in good order, but when the BVPPC is attached it does not boot. I have a good PSU, and the 5V line is stable at 4.77V when everything is connected, including on the BVPPC. This behaviour agrees with what the previous owner of the BPPC stated, but the board has since been worked on - it's now running a Rev 6 060 with the original heatsink on the PPC.
I don't currently have a working fan for the PPC, but I would assume that someone capable of working on the cards would likely have one whilst working on it.
I'm thinking this might be a job for stachu100!
Best,
Colin
I have a BPPC with SCSI, and a BVPPC - the BPPC appears in good order, but when the BVPPC is attached it does not boot. I have a good PSU, and the 5V line is stable at 4.77V when everything is connected, including on the BVPPC. This behaviour agrees with what the previous owner of the BPPC stated, but the board has since been worked on - it's now running a Rev 6 060 with the original heatsink on the PPC.
I don't currently have a working fan for the PPC, but I would assume that someone capable of working on the cards would likely have one whilst working on it.
I'm thinking this might be a job for stachu100!
Best,
Colin