Automatic Kickstart Switcher for Amiga 1000 [PERFECT WORKING]

  • Thread starter Thread starter Tuxbar81
  • Start date Start date
  • Replies Replies 619
  • Views Views 110115
Status
Not open for further replies.
Tuxbar81 said:
Just to show how is the LED module. The idea is to replace the power LED by the LED module.
The front case requires modification to allow the introduction of LED module as picture shows.
The LEDs will be flat and not cylindrical as illustrated into picture of PCB.

What do you think about this idea?
Click to expand...

Personally i will never be drilling any holes in my case

- - - Updated - - -

Ordyne said:
Liking the silk screen :)
Click to expand...

+ 1:) when/where can we send payment?
 
Components received saturday... I have forgotten the 28 pins IC sockets needed for some Amiga 1000.
The LED I have received are not the one I have ordered. They are a bit smaller... I'm really angry.

I'm going to see for the price as soon as possible.
 
Last edited:
DutchinUSA said:
Hi there buddy ! Any news? :)
Click to expand...

Yes, some... look at the pictures!
I have soldered resistors and capacitors onto 24 boards. I have begun to solder also ICs, but I need a some soldering paste and flux.
They were bought friday with 28 pin sockets (needed onto some A1000), some missing ICs and a new magnifying Lamp!

I'm sorry, but I have spent a lot of time ontot the project of PCBs for the GBA1000.
About the price, The A500/2000 kickstart switcher is about 13,50€
This one, for the A1000, the price will be 15€. (PCB price higher and a bit more components)
Finally, it's not a high difference!:)

If you go onto the first post of this thread, you'll see that I've put the list of interested members into a table, with name of members, numbers of adapters wanted, paid and sent columns.

Voilà!!
 

Attachments

  • pcb-ksw1000.jpg
    pcb-ksw1000.jpg
    78.8 KB · Views: 6
Sorry to be a pita but seeing as you're doing it with the 500/2000 version... would it possible to make a ribbon for this so we could fit it to the PAL version without having to solder sockets to our mobo?

If so can I reserve one of these with a ribbon as well pls :D.
 
Monkeh said:
Sorry to be a pita but seeing as you're doing it with the 500/2000 version... would it possible to make a ribbon for this so we could fit it to the PAL version without having to solder sockets to our mobo?

If so can I reserve one of these with a ribbon as well pls :D.
Click to expand...

That could be a solution, but that'll need a mini-PCB and a ribbon.

To members who have declared their interest: Please let me know the version of your A1000 (PAL or NTSC). I have added two cloumns into the table for that.
 
Last edited:
Status
Not open for further replies.

Similar threads

Tuxbar81
  • Locked
A500/A2000 Automatic Kickstart Switcher - New project!
35 36 37
Replies
736
Views
112K
tonyrocks
T
Back
Top Bottom