Hi!
I'm selling my EZ Z4 Tower as a full starter package. Include in this sale:
EZ Z4 Tower (new inc Oct 2010 from Amigakit)
ATX-Amiga Power adapter from Amigakit (for the Z4 Tower so you can use even without a Busboard)
ATX PSU 300w (Amigakit)
LED adapter
880k Floppy Drive and long cable
DVDRW Drive (Nice colour match & low profile at the back)
A1200 Rev 1D4 Motherboard (Fully working, new Caps Dec 2012)
Motherboard Fully tested with BPPC, Apollo & ACA cards and also Mediator PCI/GREX PCI.
Lyra Keyboard adapter (use PS2 or Amiga keyboards/AT Keyboards with adapter)
Elbox EIDE 4Way Buffered IDE Device & cables + drivers Disk.
Slim Black USB/PS2 Keyboard and Black Amiga Mouse (look awesome on the desk with a black Monitor)
Selling as a full kit only, no splits so don't ask!
There are a few small marks on the case/side panels but overall condition is very good, no yellowing. A couple of the rivets in the back have come a little loose at the top so the buyer might want to get them re-done. One of the rear screw holes for the side panel is threaded, I'll fit a bigger screw for now.
Otherwise complete and fully serviceable! I have the blankers for the front bays so they will be included.
It's ready to boot, just add a HDD, the case & PSU will also support a busboard such as a Mediator 1200/GREX PCI/Elbox Z4/PCI. A Turbo board is highly recommended!
This Tower has housed a Mediator PCI 1200sx (note bottom slot on a 6 slot board has no access to a backplane) and GREX PCI both were a good fit. And the PSU is completely up to the job of powering the A1200, the Busboard and a Blizzard PPC
I'm asking £250 + P&P for the lot!
The following items in the pictures are not included in the sale:
Subway USB
ACA1220
Front mounted USB/CF slots
Rear mounted USB sockets
Kingspec SSD
If you want the Subway USB I can be persuaded to sell it for £180 extra, this will include the front and rear USB sockets. Not available on it's own, sorry.
Here are the pics:
Terms of sale:
If you do not accept my terms please do not declare interest.
I'm selling my EZ Z4 Tower as a full starter package. Include in this sale:
EZ Z4 Tower (new inc Oct 2010 from Amigakit)
ATX-Amiga Power adapter from Amigakit (for the Z4 Tower so you can use even without a Busboard)
ATX PSU 300w (Amigakit)
LED adapter
880k Floppy Drive and long cable
DVDRW Drive (Nice colour match & low profile at the back)
A1200 Rev 1D4 Motherboard (Fully working, new Caps Dec 2012)
Motherboard Fully tested with BPPC, Apollo & ACA cards and also Mediator PCI/GREX PCI.
Lyra Keyboard adapter (use PS2 or Amiga keyboards/AT Keyboards with adapter)
Elbox EIDE 4Way Buffered IDE Device & cables + drivers Disk.
Slim Black USB/PS2 Keyboard and Black Amiga Mouse (look awesome on the desk with a black Monitor)
Selling as a full kit only, no splits so don't ask!
There are a few small marks on the case/side panels but overall condition is very good, no yellowing. A couple of the rivets in the back have come a little loose at the top so the buyer might want to get them re-done. One of the rear screw holes for the side panel is threaded, I'll fit a bigger screw for now.
Otherwise complete and fully serviceable! I have the blankers for the front bays so they will be included.
It's ready to boot, just add a HDD, the case & PSU will also support a busboard such as a Mediator 1200/GREX PCI/Elbox Z4/PCI. A Turbo board is highly recommended!
This Tower has housed a Mediator PCI 1200sx (note bottom slot on a 6 slot board has no access to a backplane) and GREX PCI both were a good fit. And the PSU is completely up to the job of powering the A1200, the Busboard and a Blizzard PPC
I'm asking £250 + P&P for the lot!
The following items in the pictures are not included in the sale:
Subway USB
ACA1220
Front mounted USB/CF slots
Rear mounted USB sockets
Kingspec SSD
If you want the Subway USB I can be persuaded to sell it for £180 extra, this will include the front and rear USB sockets. Not available on it's own, sorry.
Here are the pics:
Terms of sale:
- Payment is by PayPal, Bank Transfer or Neteller. Buyer pays any associated fees
- Overseas shipping is possible but at the buyers risk - If insurance is taken I will handle the claim in the event of loss/damage and will pass on any received compensation
- I will accept returns on my items but return shipping is to be paid by the buyer regardless of the reason/s for return.
- Unless otherwise stated prices are not negotiable
- Unless agreed otherwise payment is expected within 24hrs after interest declared, I reserve the right to move onto next in line after this time frame.
If you do not accept my terms please do not declare interest.