A3000 problems

desantii

New member
Banned
Joined
Sep 24, 2009
Posts
68
Country
Chicago
I had a working a3000 and of course, the expansion bug... Tried a warp engine 040, everything working fire. The onboard 030 seemed very hot (I thought it was weird)

Removed the warp engine, an then no boot (after returning the jumpers to their original position). Black screen, cosntant (reboots) and then a yellow screen.

If I put the warp , it works fine. (after setting the jumpers for external)

Any thoughts
 

LTAC

New member
AmiBayer
Joined
Mar 21, 2009
Posts
2,527
Country
FRANCE
Region
South of PARIS
I had a working a3000 and of course, the expansion bug... Tried a warp engine 040, everything working fire. The onboard 030 seemed very hot (I thought it was weird)

Removed the warp engine, an then no boot (after returning the jumpers to their original position). Black screen, cosntant (reboots) and then a yellow screen.

If I put the warp , it works fine. (after setting the jumpers for external)

Any thoughts

Warp Engine with memory on board ?
Fisrt, can you check the A3000 without ZIP memory? Only 1MB CHIP and 1MB FAST (dip on the right sockets).
 

desantii

New member
Banned
Joined
Sep 24, 2009
Posts
68
Country
Chicago
Same issue removing all zip and passing 1mn of chip to fast Blacl screen like it wants to boot and then reboot..
 
Top Bottom