TreacleWench
New member
I am selling my A600 which has many modifications, some of which are incomplete.
Mods are as follows:
Custom ROM chip containing KS 1.3 (patched to boot from IDE) and KS 3.1 switchable using externally mounted switch.
Original KS 1.3 and 3.1 chips included.
A620 accelerator card wired to ROM switcher so it gets disabled when when used with KS 1.3.
CF to IDE adapter with 4GB CF card, formatted.
HxC Floppy Emulator. Fitted in place of floppy drive with SD Card slot accessible through disk drive slot. Control buttons fitted to case but wired wrong way round! LCD screen included but not fitted. Connectors and cable for LCD included but need assembling. Case has not been cut for the screen. 8GB SD card included.
Indivision ECS with VGA connector fitted to back panel, replacing RF Modulator which has been removed.
Kipper2K external CF card adapter, not fitted, case needs cutting.
Pico PSU and Amiga to Pico PSU adapter, not yet fitted. Case and motherboard will need modding.
Micromys V3 mouse adapter, an adapter or some modification will be required to plug it into the A600 as it won't fit the recessed controller ports.
Amigakit Boing Ball Mouse, requires Micromys V3 to work.
There might be more, I'll add them if I remember!
£350 GBP + postage via PayPal Gift (or buyer pays fees) or cash on collection. Collection is preferred as postage will probably be very expensive and item is fragile.
Images here: https://www.dropbox.com/sh/ieimrxahuy2fcq1/DX84my1pVR
Mods are as follows:
Custom ROM chip containing KS 1.3 (patched to boot from IDE) and KS 3.1 switchable using externally mounted switch.
Original KS 1.3 and 3.1 chips included.
A620 accelerator card wired to ROM switcher so it gets disabled when when used with KS 1.3.
CF to IDE adapter with 4GB CF card, formatted.
HxC Floppy Emulator. Fitted in place of floppy drive with SD Card slot accessible through disk drive slot. Control buttons fitted to case but wired wrong way round! LCD screen included but not fitted. Connectors and cable for LCD included but need assembling. Case has not been cut for the screen. 8GB SD card included.
Indivision ECS with VGA connector fitted to back panel, replacing RF Modulator which has been removed.
Kipper2K external CF card adapter, not fitted, case needs cutting.
Pico PSU and Amiga to Pico PSU adapter, not yet fitted. Case and motherboard will need modding.
Micromys V3 mouse adapter, an adapter or some modification will be required to plug it into the A600 as it won't fit the recessed controller ports.
Amigakit Boing Ball Mouse, requires Micromys V3 to work.
There might be more, I'll add them if I remember!
£350 GBP + postage via PayPal Gift (or buyer pays fees) or cash on collection. Collection is preferred as postage will probably be very expensive and item is fragile.
Images here: https://www.dropbox.com/sh/ieimrxahuy2fcq1/DX84my1pVR
Last edited:
