Closed ACA 1220 Accelerator with 128MB RAM

[britlord]

I have a new ACA 1220 Accelerator with 128MB RAM with a 68020 (Gold) 25MHz processer. I bought this board with the plastic (Horrible) 16MHz processer soldered in, so I removed it and soldered in a nice socket, and fitted a faster (Better) 68020 25MHz processer (You see I'm a expert at soldering and de-soldering electronics). This Accelerator has been tested by me and works fine with OS3.9.. Guaranteed....

only $125 Shipped..

Thanks for looking..

Oh by the way. The board will come in it's original box and ACATune on disk too.... Plus processer is not overclocked (In case your all thinking it)....

 

[sputnik]

Oh by the way. You can still fit the trapdoor...

Not declaring interest, but... how well does it fit? Is it pressing against the door or is there some breathing space?

 

[britlord]

Nope it's not pressing against the door, so there is a bit of breathing space (Processer is level with the boards white socket). Thought the CPU runs cool, if you want to. You could drill a few air holes in the trapdoor (I would mark where the CPU is first though). But I can supply a pre-drilled trapdoor (I've just drilled it). But the interested buyer must send me back a replacement, cos this is the only one that I have.... (Darn I should have been a bloody engineer instead of a unpaid house husby)

 

[liviux76]

Declaring interest! Sending PM.

 

[britlord]

PM replied.
Card reserved for Livio

 

[britlord]

Card sent to Livio!
Shipping details sent by PM.

and here's ACATune that you will need..