Hello there,
I am selling my good old Apollo 1260@66Mhz
I used it mainly for 060 demos, web surfing, Mac emulation, ScummVM, etc.
OTHER PHOTOS :
http://imgur.com/a/GfNIw
SPECS :
- She comes with 2x32 MB FAST Ram, MMU, FPU, RTC.
- The 68060 is a rev. 5
- She accepts the Marmes hack as the Mach210 is NOT socketed. (See photos. I removed the hack as I don't have any 64 MB RAM stick left, and I want to sell something that works immediately for the buyer) BUT see BONUS part please
https://www.amibay.com/showthread.p...-Single-simm-64mb-MOD-boards&highlight=marmes
You might use this card with 2x32 MB ram in a tower.
You might use this card with 2x32 MB ram in a DIY case.
You might use this card with 1x32 MB ram in a normal A1200 case.
You might use this card with 1x64 MB ram in a normal A1200 and / or any tower case after replugging Marmes hack and soldering the two provided wires.
- I soldered a connector on the card to plug a heat fan. See photos.
Personnaly I used it in a cooled tower WITHOUT radiator or fan : as it's a rev.5 she gets a bit hot of course, but works flawless.
However if you intend to use it in a "normal case" or a "basic tower", please consider at least a radiator OR a fan, OR better : both.
BTW, please be sure your PSU is strong enough to run a 68060. Usually I got no problem but as Stachu always remind us all : this can be an issue
WITH THE CARD :
1 : A radiator (See photos. I don't provide thermal paste, as I'm not sure I can send this using postal services...)
2 : A heat FAN specially modified to fit the card. It's a Cooltek Zero Noise (Silent FAN). See photos.
3 : The Marmes hack interface and 2 wires Just clip it back, solder the two wires, or ask an expert to do so for you, put your personal 64 MB ram stick : enjoy
BONUS 4 : The very rare Apollo SCSI interface (See photos). This interface will let you use some SCSI devices, provided DMA is not needed. Not the best SCSI, but provided you find compatible devices it might work well http://amiga.resource.cx/exp/apolloscsi
5 : A SCSI cable DB25 <-> PARALLEL SCSI
6 : A SCSI cable DB25 <-> Ultra 320 SCSI (External + Internal + Terminator)
DRIVERS :
- I will provide a DMS image of the original drivers BUT ALSO newer files archive to make sure the card runs well (libraries and exe).
PRICE :
575 € INCLUDING shipping anywhere in Europe (ONLY Europe for the moment, sorry).
550 € if you live near Paris (FRANCE), and can come get it personnally from my own hand.
PAYMENT / SHIPPING :
Payment with PAYPAL (gift mode) or IBAN
Shipping will be Tracked and Insured
Please be aware that if you buy it after October 21st, the card won't ship before 29th October (as I will be in holidays).
Thanks for your interest, feel free to ask any question
Rod
I am selling my good old Apollo 1260@66Mhz
I used it mainly for 060 demos, web surfing, Mac emulation, ScummVM, etc.
OTHER PHOTOS :
http://imgur.com/a/GfNIw
SPECS :
- She comes with 2x32 MB FAST Ram, MMU, FPU, RTC.
- The 68060 is a rev. 5
- She accepts the Marmes hack as the Mach210 is NOT socketed. (See photos. I removed the hack as I don't have any 64 MB RAM stick left, and I want to sell something that works immediately for the buyer) BUT see BONUS part please
https://www.amibay.com/showthread.p...-Single-simm-64mb-MOD-boards&highlight=marmesYou might use this card with 2x32 MB ram in a tower.
You might use this card with 2x32 MB ram in a DIY case.
You might use this card with 1x32 MB ram in a normal A1200 case.
You might use this card with 1x64 MB ram in a normal A1200 and / or any tower case after replugging Marmes hack and soldering the two provided wires.
- I soldered a connector on the card to plug a heat fan. See photos.
Personnaly I used it in a cooled tower WITHOUT radiator or fan : as it's a rev.5 she gets a bit hot of course, but works flawless.
However if you intend to use it in a "normal case" or a "basic tower", please consider at least a radiator OR a fan, OR better : both.
BTW, please be sure your PSU is strong enough to run a 68060. Usually I got no problem but as Stachu always remind us all : this can be an issue
WITH THE CARD :
1 : A radiator (See photos. I don't provide thermal paste, as I'm not sure I can send this using postal services...)
2 : A heat FAN specially modified to fit the card. It's a Cooltek Zero Noise (Silent FAN). See photos.
3 : The Marmes hack interface and 2 wires
Just clip it back, solder the two wires, or ask an expert to do so for you, put your personal 64 MB ram stick : enjoy BONUS 4 : The very rare Apollo SCSI interface (See photos). This interface will let you use some SCSI devices, provided DMA is not needed. Not the best SCSI, but provided you find compatible devices it might work well
http://amiga.resource.cx/exp/apolloscsi5 : A SCSI cable DB25 <-> PARALLEL SCSI
6 : A SCSI cable DB25 <-> Ultra 320 SCSI (External + Internal + Terminator)
DRIVERS :
- I will provide a DMS image of the original drivers BUT ALSO newer files archive to make sure the card runs well (libraries and exe).
PRICE :
575 € INCLUDING shipping anywhere in Europe (ONLY Europe for the moment, sorry).
550 € if you live near Paris (FRANCE), and can come get it personnally from my own hand.
PAYMENT / SHIPPING :
Payment with PAYPAL (gift mode) or IBAN
Shipping will be Tracked and Insured
Please be aware that if you buy it after October 21st, the card won't ship before 29th October (as I will be in holidays).
Thanks for your interest, feel free to ask any question
Rod
Last edited: