Hi Folks!
I bought this from Fitz Steve here a couple of years ago.
I have decided to sell this hardware to someone who will use it more than me.
I have only tested this kit.
This is a complete upgrade kit for your A1200, you will of course need a Tower for your A1200 to use the Mediator
The following Hardware & Software is included in the buddle:
Blizzard PPC, upgraded by Stachu with latest mask 060 (was an 040) and 300mhz PPC clocked at 330mhz. 060 can run between 50mhz & 66mhz (maybe even 72mhz!) It is supplied with a 60mhz crystal. (Oscillator for 060 is socketed) This is a Rev0 board with no SCSI
2x 128mb Simms for a maxed out 256mb Ram
Genuine OS4.1 Classic, boxed with Boot Floppy, Manual & CDROM.
Mediator 1200TX (6 PCI slots) This is the latest Mediator from Elbox. Boxed but there is no MMCD, The Mediator & PCI cards have native support in OS4.1 Classic, I will put on CDR the OS3.x drivers.
Radeon 9250 128mb PCI Graphics Card, supported in OS3.x and OS4.1 Classic, compatible with Warp3D & full hardware transparency features in OS4.1 Classic
SATA PCI Card so you can use SATA HDD's in OS4.1 Classic, if you like you can boot from a CF card (the OS4.1 kickflash) and then have it automatically disable IDE and run only from SATA
Realtek 8029AS PCI Network Card, fully supported by OS3.x & OS4.1 Classic.
USB PCI Card (Only supported in OS3.x)
For all this great hardware I am looking for €1500 + P&P and will give you the absolutely most pimped out A1200 possible!
I'll post Photo's tomorrow as I need to gather everything together, all items are tested & working.
Please bare in mind that this hardware can be quite tricky to setup, it's probably not ideal for a complete novice user however the OS4.1 Manual, if followed step by step shouldn't prove too much of a challenge as I said, all hardware has native support in OS4.1 Classic (except the USB card)
A 4Way IDE device is recommended for installing OS4.1 Classic as you need to have the HDD and CDROM on the same IDE0 channel for install and to correctly boot (Although it may be possible to create a custom cable I'd recommend doing it the tried & tested way)
If you are interested in a 1200 tower I also have one for sale.
It is with a1200 motherboard and an mediator, sound and VGA card.
My project was to put all these nice things in this tower.
But other things have come in my way.
I am looking for €400 + P&P for the tower with Mediator, sound card and VGA.
I will put pictures on everything tomorrow.
I bought this from Fitz Steve here a couple of years ago.
I have decided to sell this hardware to someone who will use it more than me.
I have only tested this kit.
This is a complete upgrade kit for your A1200, you will of course need a Tower for your A1200 to use the Mediator
The following Hardware & Software is included in the buddle:
Blizzard PPC, upgraded by Stachu with latest mask 060 (was an 040) and 300mhz PPC clocked at 330mhz. 060 can run between 50mhz & 66mhz (maybe even 72mhz!) It is supplied with a 60mhz crystal. (Oscillator for 060 is socketed) This is a Rev0 board with no SCSI
2x 128mb Simms for a maxed out 256mb Ram
Genuine OS4.1 Classic, boxed with Boot Floppy, Manual & CDROM.
Mediator 1200TX (6 PCI slots) This is the latest Mediator from Elbox. Boxed but there is no MMCD, The Mediator & PCI cards have native support in OS4.1 Classic, I will put on CDR the OS3.x drivers.
Radeon 9250 128mb PCI Graphics Card, supported in OS3.x and OS4.1 Classic, compatible with Warp3D & full hardware transparency features in OS4.1 Classic
SATA PCI Card so you can use SATA HDD's in OS4.1 Classic, if you like you can boot from a CF card (the OS4.1 kickflash) and then have it automatically disable IDE and run only from SATA
Realtek 8029AS PCI Network Card, fully supported by OS3.x & OS4.1 Classic.
USB PCI Card (Only supported in OS3.x)
For all this great hardware I am looking for €1500 + P&P and will give you the absolutely most pimped out A1200 possible!
I'll post Photo's tomorrow as I need to gather everything together, all items are tested & working.
Please bare in mind that this hardware can be quite tricky to setup, it's probably not ideal for a complete novice user however the OS4.1 Manual, if followed step by step shouldn't prove too much of a challenge as I said, all hardware has native support in OS4.1 Classic (except the USB card)
A 4Way IDE device is recommended for installing OS4.1 Classic as you need to have the HDD and CDROM on the same IDE0 channel for install and to correctly boot (Although it may be possible to create a custom cable I'd recommend doing it the tried & tested way)
If you are interested in a 1200 tower I also have one for sale.
It is with a1200 motherboard and an mediator, sound and VGA card.
My project was to put all these nice things in this tower.
But other things have come in my way.
I am looking for €400 + P&P for the tower with Mediator, sound card and VGA.
I will put pictures on everything tomorrow.
Last edited:
