Amiga 1200 USB problems in OS 4.0

amigaman2000

Amiga Forever
AmiBayer
Joined
Mar 18, 2010
Posts
1,112
Country
Spain
Region
Pontevedra
Hi

I have just installed Amiga OS 4.0 on my Amiga 12000 and all work perfectly except the Subway USB card. It doesn´t work at all in OS 4.0, it works great on 3.9 so I need to know if a need a special driver for it to work on OS 4.0. I have installed the OS for two times with any luck, as I said it, works perfectly on 3.9 so , any idea wath can be wrong?

Regards


My setup is an Amiga 1200, commodore version, kickStart 3.1, Blizzard PPC 175 Mhz., Blizzard Vision, Internal laptop CDROM and Subway USB. I use an 450 watts ATX power supply
 
Last edited:

Kin Hell

Active member
Banned
Joined
Nov 25, 2007
Posts
6,970
Country
U.K.
Region
Cornwall
This is so funny......

SUBWAY USB A1200 YES Works on either of the X-SURF 3CC Clockports
:blink: :whistle: :Doh: :nuts:

From here: http://www.acube-systems.biz/compatibility/

I guess they meant A4000, so if you can get an X-Surf to work in an A1200 without a Z3i Bus board, please post some pics. :mrgreen:

I built a huge A1200 Dual booting OS3.9 & OS 4.0 Classic for a guy in Italy, but I didn't check USB functionality under OS 4.0. :Doh:

That aside, surely someone on here using OS4 Classic can confirm?

You could PM ravestar and ask him. I'm sure he'd be glad to help.

Kin
 

AndyLandy

Acceleration!
Treasurer
Joined
Aug 29, 2009
Posts
9,898
Country
UK
Region
Southampton
This is so funny......

SUBWAY USB A1200 YES Works on either of the X-SURF 3CC Clockports
:blink: :whistle: :Doh: :nuts:

From here: http://www.acube-systems.biz/compatibility/

I guess they meant A4000, so if you can get an X-Surf to work in an A1200 without a Z3i Bus board, please post some pics. :mrgreen:

Otherwise it seems an awful lot of effort to go to, just to add a clockport to an A1200, considering it has one on the motherboard already!
 

Kin Hell

Active member
Banned
Joined
Nov 25, 2007
Posts
6,970
Country
U.K.
Region
Cornwall
^^^^^^

But it works fine for him on OS3.9 Andy.

Obviously the hardware is okay, it's just OS4.0 Classic rearing it's ugly head again.

The Subway has it's own Key file on the card itself, so when installing Poseidon, it should be good to go.

@ amigaman2000

Have you been here to download the latest version.

http://www.platon42.de/poseidon.html

It's version 4.4 as of Feb 10th 2010.

However, I just had a quick look here

http://www.e3b.de/usb/main_subway_e.html

& it appears as though OS4 Classic is not a supported OS. If you Email them, they will be glad to help. ;)

Kin
 

amigaman2000

Amiga Forever
AmiBayer
Joined
Mar 18, 2010
Posts
1,112
Country
Spain
Region
Pontevedra
Thanks for the answers

As I said in my post, Subway works perfectly under OS 3.9, the problem is with OS 4.0, in the OS 4.0 hardware support page from Hyperion, it said that it works in the clock port of the X-Surf on the Amiga 4000 so I think that may work on Amiga 1200 clockport but it doesn´t.

I will email e3b about compatibility.

Regards
 

amigaman2000

Amiga Forever
AmiBayer
Joined
Mar 18, 2010
Posts
1,112
Country
Spain
Region
Pontevedra
I have just resolved the problem.

I make a new OS 4.0 nstall and then install Poseidon 4.4, now all is working perfectly.

I send an email to Michael Boehmer at e3b and he answer me in few minutes, incredible good service.

Thanks all for your support
 
Top Bottom