AMIGA 500 68000 STRAIGHT CPU PROCESSOR RISER RELOCATOR (TF536 + RAMasses)

[PropBlast]

As I'm going to fit a RAMasses II in my Amiga A500 to go along with my TF536 it's pretty obvious that there is not going to be enough clearance between the TF535 and the RAMasses so I need to find a solution to the problem. Could I piggyback the following item to provide enough clearance between the TF536 and the RAMasses?
https://sordan.ie/product/1263/amiga-500-68000-straight-cpu-processor-riser-relocator-black/

How have others with the same setup solved this problem?

 

[CRP]

I have the same issue. I installed a Liv2 2Meg Chip adapter, to go along with a TF530 with 90 degree relocator. In order to fit everything I placed two 64 pin sockets between the original 68k socket on the mobo and the 90 degree relocator. This raises the TF530 just enough so that it does not interfere with the agnus adapter. Unfortunately the relocator now touches the keyboard, creating an approx 2 mm gap between keyboard and case. I ordered the straight cpu relocator that you mentioned, when I get it I will post whether it solved the issue or not.