Closed Amiga tower df0 floppy drive wanted

  • Thread starter Thread starter wanderlead
  • Start date Start date
  • Replies Replies 3
  • Views Views 559
Status
Not open for further replies.
wanderlead

wanderlead

Member
Rating - 100%
1   0   0
Joined
Sep 27, 2015
Posts
40
Country
uk
Region
tyne and wear
Need a df0 floppy drive for a power tower 1200 with fascia

Maybe an Amiga 2000 drive would work if I use a twisted floppy cable

Amigakit used to sell one that had jumpers for ds0 ds1 but sold out

Based in UK and use paypal



Sent from my SM-G935F using Tapatalk
 
Get a regular el cheapo unmodified PC drive and a regular flat 34-wire floppy cable. "A" means amiga end of the cable, "F" means floppy end of the cable.
Do the following modifications to the cable:

Cut in half wires #2 and #34, connect (solder) halves #2A and #34F together.
Cut away half #2F completely, and solder the ANODE of an 1N914 or 1N4148 diode to half #34A.

Strip a bit of the PVC coating from wire #8 so the metal core is exposed without cutting the wire in half. Solder the CATHODE of the diode there.

Cut in half wires #10 and #12, connect #10A and #12F together. Cut away #10F and #12A.


With this cable, practically any off-the-shelf PC drive will work as an Amiga df0: drive.
 
Status
Not open for further replies.

Similar threads

G
  • Locked
Found FZ-357 Floppy drive wanted
Replies
0
Views
162
Grimmert2
G
G
  • Locked
Closed FZ-357 Floppy drive wanted
Replies
0
Views
144
Grimmert2
G
Merlin
  • Locked
Found A600/A1200 floppy drive wanted
Replies
5
Views
1K
Merlin
Merlin
C
  • Locked
Closed Amiga 500 Floppy Drive wanted.
Replies
2
Views
876
carvedeye
C
mjnurney
  • Locked
Closed A600 floppy drive wanted
Replies
0
Views
775
mjnurney
mjnurney
Back
Top Bottom