For Sale Asus SP97-V motherboard (Socket7)

  • Thread starter Thread starter euromatlox
  • Start date Start date
  • Replies Replies 0
  • Views Views 532
Status
Not open for further replies.

euromatlox

Member
Rating - 100%
7   0   0
Joined
Aug 20, 2023
Posts
35
Country
Finland
Region
Pirkanmaa
Items located in Finland. I will sell to (most of) Europe. SEPA or PayPal friends.

For sale Asus SP97-V (rev. 1.02) socket 7 motherboard with Intel 200MHz MMX cpu and 64 Mb memory installed.

This is AT motherboard, accepting either AT or ATX power source unit.
Currently the cpu cooling is passive, using a (slightly modified) Socket A heatsink without fan.
In my tests cpu/heatsink did not produce much heat, can of course add a fan if needed.

Basic testing has been made.
Shortly booting from floppy, recognize hdd and DIR command for hdd.
I tried compactflash drive too, recognized ok, but in DOS just Invalid Drive..so it seems that a real hard drive required.
=> I decided to add a Quantum 15gb HDD (no extra costs).

Had some problems booting at first, and because of that electrolytic capacitors are replaced.
Anyway the main problem was bad contact in PSU connector, just in case did some re-soldering there too.

Now the mainboard seems be in good working condition.

Asking 50 euros plus shipping costs. Shipping costs for most european countries are about 25 euros. (75€ total)
I will find and verify the exact shipping costs after raised interest, before any decisions & payment.
(No selling to Norway..shipping costs are enormous.)

An old 'cheapo' ATX PSU is available for free with this motherboard.
For a few extra euros a S3 PCI display adapter is also available, if not happy with MB's internal graphics.

List of contents:
- Asus SP97-V motherboard
- Intel 200MHZ MMX processor
- 64Mb EDO RAM installed (4 x 16Mb SIMM)
- 3 x brackets (including connections for VGA, 2xUSB, PS/2 for mouse, Serial, Parallel)
- ATX psu 'cheapo' (brand: KME)
- Quantum 15gb HDD (used in testing, slightly noisy)

I have self made the USB bracket, so for maximum safety please verify the connections from MB's manual before use.
In my quick testing I only used VGA bracket - internal graphics functioned ok.
 

Attachments

  • 0990.JPG
    0990.JPG
    241.7 KB · Views: 40
  • 0987.JPG
    0987.JPG
    164.1 KB · Views: 34
  • 0970.JPG
    0970.JPG
    70.6 KB · Views: 25
  • 0966.JPG
    0966.JPG
    69.9 KB · Views: 21
  • 0964.JPG
    0964.JPG
    32.6 KB · Views: 20
  • brackets.jpg
    brackets.jpg
    68.3 KB · Views: 29
Last edited:
Status
Not open for further replies.
Back
Top Bottom