Dear Amibayers,
For sale is a mint condition Checkmate 1500+ case plus the Amiga 3000 fitting kit by @simon_m74.
I bought this as a bundle here on Amibay to install my A3000 mainboard. Later, I had the chance to acquire an original case. Thus, I decided to sell this set.
I want 420 EUR incl. EU-wide shipping for everything listed below.
Because it's a bulky lot, I'm offering EU shipping only.
Pick-up near Tübingen/Germany is also possible. Collection at my place will warrant a 25 EUR discount.
What's in the Box?
Here's an overview:
And here's the detailed list:
1) The case with a custom-made A3000 backplate. Also included is a mounted SD card extension for ZuluSCSI or similar.
2) Complete documentation.
3) A custom-made A3000D daughterboard. This allows you to connect an ATX/SFX power supply. The small plug then goes into the mainboard power connector.
4) A set of 5.25" slot covers for different purposes.
5) A custom-made drive plate/daughterboard holder.
6) Mounting brackets for hard drive and floppy/Gotek.
7) An integrated Gotek mounting bracket that fits over a BFG9060 and integrates nicely into the front. This is my own design. I leave the OLED and rotary in place. The rotary has one loose cable that needs to be soldered back on. To complete the assembly, you need a bare Gotek PCB and a knob for the rotary encoder.
8) Some backplates and brackets to fit a PC mainboard and drives into the case, should you wish to do so.
9) A lot of screws, clamps, and a nice badge.
10) The original packaging. I'll put this in a larger box to protect it during its journey to you.
If you are interested in buying this set, please declare interest in the thread and send me a PM, so we can work out the details. Thank you!
For sale is a mint condition Checkmate 1500+ case plus the Amiga 3000 fitting kit by @simon_m74.
I bought this as a bundle here on Amibay to install my A3000 mainboard. Later, I had the chance to acquire an original case. Thus, I decided to sell this set.
I want 420 EUR incl. EU-wide shipping for everything listed below.
Because it's a bulky lot, I'm offering EU shipping only.
Pick-up near Tübingen/Germany is also possible. Collection at my place will warrant a 25 EUR discount.
What's in the Box?
Here's an overview:
And here's the detailed list:
1) The case with a custom-made A3000 backplate. Also included is a mounted SD card extension for ZuluSCSI or similar.
2) Complete documentation.
3) A custom-made A3000D daughterboard. This allows you to connect an ATX/SFX power supply. The small plug then goes into the mainboard power connector.
4) A set of 5.25" slot covers for different purposes.
5) A custom-made drive plate/daughterboard holder.
6) Mounting brackets for hard drive and floppy/Gotek.
7) An integrated Gotek mounting bracket that fits over a BFG9060 and integrates nicely into the front. This is my own design. I leave the OLED and rotary in place. The rotary has one loose cable that needs to be soldered back on. To complete the assembly, you need a bare Gotek PCB and a knob for the rotary encoder.
8) Some backplates and brackets to fit a PC mainboard and drives into the case, should you wish to do so.
9) A lot of screws, clamps, and a nice badge.
10) The original packaging. I'll put this in a larger box to protect it during its journey to you.
If you are interested in buying this set, please declare interest in the thread and send me a PM, so we can work out the details. Thank you!
