Sold Commodore Amiga 4000 Desktop (system unit only)

[angrybear]

SOLD to XLV2K
Configuration:
motherboard rev B
2MB CHIP RAM and 16MB FAST RAM - all in modules
MC68030 25MHz + FPU on the processor card
Kickstart 3.1 (CLOANTO license)
SuperBuster 11
FDD 1,76MB Chinon FB-357A
CF card 4GB instead of HDD (card in the rear slot)
CD-ROM
simm slots replaced with new ones
original accumulator was replaced without leakage
Workbench 3.0 discs (last image)

Amiga has been recapped. The computer is in very good technical condition.
Li-Po accumulator was installed but it doesn't save the clock after poweroff
because Amiga has been run about 20 - 30 times in the last 5 years and battery has run out.

Another minor problem is that after firts poweron you will see only Kickstart screen.
You must reset the Amiga (A+A+Ctrl). Next, Amiga loads Workbench normally form CF card.
Workbench was coppied from ClassicWB packet to CF card and probably this situation is responsbible for that inconvenience.

I have checked first boot on the other system.
I have installed Workbench from discs on another CF card.
System boot directly without stopping on Kickstart screen.
Thus the problem is only with that particular CF card and instance of Workbench.
I can install the system from scratch on this CF card if the buyer wants it.



more pictures and video:
https://files.fm/u/jun3zef9j

System unit only without keyboard and without mouse.
Payment via PayPal
Price: 1200€ (was 1300€, 1400€)+ shipping + PP fees

 

[Sardine]

The kickstart must be officially licensed not a home burnt eeprom

also workbench cannot be installed unless the license or original install media is included

 

[angrybear]

workbench cannot be installed unless the license or original install media is included

I have added Workbench discs to Amiga

The kickstart must be officially licensed not a home burnt eeprom

Can I add information that this Kickstart will be removed from Amiga before shipment?
I will try organize original or licensed Kickstart as soon as possible.

 

[angrybear]

The kickstart must be officially licensed not a home burnt eeprom

I have purchased Kickstart 3.1 with Cloanto license.
I add this ROM to Amiga.

 

[Sardine]

Perfect thanks

 

[Whaka]

Hello,

just to say, be very careful with the LiPo. they really don't charge the same way as NiCd/Mh do.
it can seriously be overdrived and inflate (and it looks he already did) in better worst case, or in worst worst case simply blow...
put a NiMh, or a 2032 with diode, but don't let this like that.

 

[angrybear]

it can seriously be overdrived and inflate (and it looks he already did)

It didn't inflate. I accidentally hooked it by the tool while I was cleaning Amiga a few years ago.

Price update:
1300€ (was 1400€)

 

[angrybear]

price update
1200€ (was 1300€, 1400€)

 

[XLV2K]

Interested, sending PM.

 

[angrybear]

pm repiled

 

[XLV2K]

Payment sent.

 

[angrybear]

Payment received.

 

[angrybear]

Package sent.