Hi there!
I've decided to sell my "Towerized" A500.
I had a lot of fun with it and I must say that having an A500 in a similar shape I was able to do all the "experiments" I liked but since I have now sold both my TF536 and my Indivision ECS I think that so much room inside a case, without using it, is a waste of space and therefore I hope this will go to someone that will add to it some great add-ons (e.g. a PiStorm?).
Everything works perfectly and, at the moment, this project is pretty much a regular 1MB A500 Rev.6A in a Tower Case.
This is the list of the components included in the sale:
01. PC Tower Case and ATX PSU with Amiga connector
02. Amiga A500 Mainboard Rev.6A
03. 512 KB Memory Expansion
04. Amiga (NOT a PC modified) Floppy Disk Drive + cables
05. A500 ports cable extensions (connected on the back of the case)
06. PS2 Keyboard Adapter + Cable
07. IDE Led Adapter
08. Quad Kickstart (1.3 / 3.1 / 3.2 / diagnostic)*
09. New PS2 "Vintage Look" keyboard, US Layout with Amiga stickers
* Buyer should demonstrate the ownership of those ROMs or I will have to remove the Quad Kickstart from the sale and sell the computer only with its 1.3 original ROM
Optional Items:
09. New PS2 "Vintage Look" keyboard, US Layout with Amiga stickers (+ 15 euros)
10. Rastport Right angled adapter with cable for IDE led Adapter + 44pin ide2cf adapter (+ 20 euros)
11. Plipbox (+ 25 euros)
12. External Commodore 1011 Floppy Drive (+ 70 euros) **
** The upper case of the External Floppy Drive has many light signs like if it was rubbed down with sandpaper
The PC Tower Computer Case was modded by me in order to fit the A500 mainboard, to have power and reset buttons in the front and the led circuit (that I did get from an A1200).
On the upper side of the front panel of the case there are two switches plugged to the quad kickstart.
Here the pictures (please note that the photos showing in detail the PS2 Keyboard Adapter and the IDE Led Adapter were took when I was using a different mainboard, pcb green and not yellow):
Keep in mind that this is an amatorial project and it could be imperfect in any way but it does the job and, in my opinion, it is aesthetically pretty nice.
The request for the Towerized A500 WITHOUT the optional items is180 170 160 euros plus shipping.
Shipping to Italy should be about 15 euros and shipping within Europe should be about 50 euros (I'll give you the actual quote once I have your shipping address).
Payment by paypal as gift or by Bank Transfer (IBAN)
Item for sale elsewhere as well. Feel free to ask any questions and thanks for reading.
I've decided to sell my "Towerized" A500.
I had a lot of fun with it and I must say that having an A500 in a similar shape I was able to do all the "experiments" I liked but since I have now sold both my TF536 and my Indivision ECS I think that so much room inside a case, without using it, is a waste of space and therefore I hope this will go to someone that will add to it some great add-ons (e.g. a PiStorm?).
Everything works perfectly and, at the moment, this project is pretty much a regular 1MB A500 Rev.6A in a Tower Case.
This is the list of the components included in the sale:
01. PC Tower Case and ATX PSU with Amiga connector
02. Amiga A500 Mainboard Rev.6A
03. 512 KB Memory Expansion
04. Amiga (NOT a PC modified) Floppy Disk Drive + cables
05. A500 ports cable extensions (connected on the back of the case)
06. PS2 Keyboard Adapter + Cable
07. IDE Led Adapter
08. Quad Kickstart (1.3 / 3.1 / 3.2 / diagnostic)*
09. New PS2 "Vintage Look" keyboard, US Layout with Amiga stickers
* Buyer should demonstrate the ownership of those ROMs or I will have to remove the Quad Kickstart from the sale and sell the computer only with its 1.3 original ROM
Optional Items:
10. Rastport Right angled adapter with cable for IDE led Adapter + 44pin ide2cf adapter (+ 20 euros)
11. Plipbox (+ 25 euros)
12. External Commodore 1011 Floppy Drive (+ 70 euros) **
** The upper case of the External Floppy Drive has many light signs like if it was rubbed down with sandpaper
The PC Tower Computer Case was modded by me in order to fit the A500 mainboard, to have power and reset buttons in the front and the led circuit (that I did get from an A1200).
On the upper side of the front panel of the case there are two switches plugged to the quad kickstart.
Here the pictures (please note that the photos showing in detail the PS2 Keyboard Adapter and the IDE Led Adapter were took when I was using a different mainboard, pcb green and not yellow):
Keep in mind that this is an amatorial project and it could be imperfect in any way but it does the job and, in my opinion, it is aesthetically pretty nice.
The request for the Towerized A500 WITHOUT the optional items is
Shipping to Italy should be about 15 euros and shipping within Europe should be about 50 euros (I'll give you the actual quote once I have your shipping address).
Payment by paypal as gift or by Bank Transfer (IBAN)
Item for sale elsewhere as well. Feel free to ask any questions and thanks for reading.
Last edited:
