Due to purchasing an upgrade system 9on here) I am selling my current setup:
1. Phase5 Cyberstorm PPC (CSPPC)
If you're looking at this, chances are you know what it is but here's the details anyway:
As listed above, I am asking $2000 shipped in the US, $2050 shipped to most of Europe (payment by PayPal F&F or Bank Transfer, eg WISE)
2. Phase5 Cybervision Graphics Card (CVPPC)
The 'fast' slot graphics add-on companion to the CSPPC:
$2300 FOR BOTH US SHIP , $2350 FOR BOTH EU SHIP ( Ask elsewhere.)
More photos to come but I wanted to capture some live shots before teardown:
www.dropbox.com
------------------------------------------------------
A word about overclocking:
1. Overclocking the 68060 with a new osc, is easy and very stable, so long as heatsink and fan are added. Note: Later masks run cooler than the rev1
2. Overclocking the CVPPC is relatively easy and stable but you *must* install heatsinks and a fan. The bus can be overlocked (via osc. swap) and the VRAM can be overclocked (as a hint the ENVironment variable is IINSTALLEDAFANONMYPERMEDIA2
)
3. Overclocking the PPC is easy, via a crystal swap, but I don't recommend it as they run super bloody hot already
1. Phase5 Cyberstorm PPC (CSPPC)
If you're looking at this, chances are you know what it is but here's the details anyway:
- 604e PPC CPU at 233MHz (66MHz bus clock as shipped from P5)
- 68060 (rev1) at 50MHz (as shipped by P5)
- 128MB 60ns 72pin SIMMs
- UWSCSI Interface (up to 40MB/s)
- Local expansion slot (50MHz) with PCI firmware (for GREX)
- Jumper moved to enable 68060 to be clocked separately from system
- Third oscillator added for 68060
As listed above, I am asking $2000 shipped in the US, $2050 shipped to most of Europe (payment by PayPal F&F or Bank Transfer, eg WISE)
2. Phase5 Cybervision Graphics Card (CVPPC)
The 'fast' slot graphics add-on companion to the CSPPC:
- Cable connecting to external slot adapter for VGA
- Permedia2 2D/3D accelerator
- 32MB VRAM
- HEATSINKS!
(No, these are not necessary unless you overclock)
$2300 FOR BOTH US SHIP , $2350 FOR BOTH EU SHIP ( Ask elsewhere.)
More photos to come but I wanted to capture some live shots before teardown:
Dropbox
------------------------------------------------------
A word about overclocking:
1. Overclocking the 68060 with a new osc, is easy and very stable, so long as heatsink and fan are added. Note: Later masks run cooler than the rev1
2. Overclocking the CVPPC is relatively easy and stable but you *must* install heatsinks and a fan. The bus can be overlocked (via osc. swap) and the VRAM can be overclocked (as a hint the ENVironment variable is IINSTALLEDAFANONMYPERMEDIA2
)3. Overclocking the PPC is easy, via a crystal swap, but I don't recommend it as they run super bloody hot already
Attachments
Last edited:
