PulsatingQuasar
Member
Pulled from a working towered Elbox Amiga 4000 which I will put on this site soon.
I don't have the driver disks anymore so you will have to get them from the internet. Both harddisks contain a working installation with the Prometheus working with the Voodoo3 and Picasso96 and the network card working with Genesis.
The setup has been working with the Yamaha CD-ROM at the end of the SCSI cable as the terminator.
- Cyberstorm mk2
- 68060 rev1
- SCSI module
- 128 MB RAM
- 18 GB UWSCSI disk including adapter
- 50 pin SCSI disk
- Yamaha SCSICD-ROM drive
- SCSI cables
- Prometheus bus board
- Voodoo 3 PCI card
- Network card
- Home made adapters to fix to the back of the tower case
Asking for 900 euro. Buyer pays shipping. EU shipping only please.









The last photo is with only the Cyberstorm mk2 running from the default Workbench floppy disk showing all the system RAM. Something in my installation or the Prometheus takes a lot of RAM.
I don't have the driver disks anymore so you will have to get them from the internet. Both harddisks contain a working installation with the Prometheus working with the Voodoo3 and Picasso96 and the network card working with Genesis.
The setup has been working with the Yamaha CD-ROM at the end of the SCSI cable as the terminator.
- Cyberstorm mk2
- 68060 rev1
- SCSI module
- 128 MB RAM
- 18 GB UWSCSI disk including adapter
- 50 pin SCSI disk
- Yamaha SCSICD-ROM drive
- SCSI cables
- Prometheus bus board
- Voodoo 3 PCI card
- Network card
- Home made adapters to fix to the back of the tower case
Asking for 900 euro. Buyer pays shipping. EU shipping only please.









The last photo is with only the Cyberstorm mk2 running from the default Workbench floppy disk showing all the system RAM. Something in my installation or the Prometheus takes a lot of RAM.
Last edited: