Deluxe Mini Monster Retro Gaming Joystick Kit.
New and unused.
What's included?
Laser cut HIPS shell
1 x Sanwa Denshi Co. JLF-TP-8YT Ball Top Arcade Joystick
2 x Sanwa Denshi Co. OBSF-30 Arcade Buttons
1 x Mini Monster Interface Kit
1 x Wiring Loom
1 X 9 Pin Extension Cable - 1.8M
1 x Artwork cover kit template for use with the additional kit available for purchase directly from Monster Joysticks website.
*All Necessary Fixtures and Fittings.
Compatibility List:
Commodore Amiga 500 -- > 4000 Computers
Atari ST
Atari 2600
Amstrad CPC
Commodore 64
Sega Master System
ZX Spectrum (Kempston)
Asking Price£45 NOW £40
Payment PayPal (Friends & Family or pay the correct fees).
Postage £3.39 Royal Mail 48 Tracked (UK Mainland).
Overseas buyers welcome. Ask for a shipping quote when declaring interest, if interested.
Manufactures Info:
Take Your Retro Gaming To The Next Level.
The Mini Monster Retro Gaming Joystick Kit from Monster Joysticks is designed to offer the best quality joystick experience for your retro computers and consoles.
The shell has been laser cut from high quality HIPS (High Impact Polystyrene) which results in an extremely durable and reliable casing. The joystick and buttons are all genuine Sanwa Denshi Co. arcade parts, these are designed to survive the most extreme usage and offer some of the highest precision available.
Designed to be fully reversible for left and right handed players*, it also features a toggle switch to allow players to map up on the joystick to the 2nd button for 1 button games that use up to jump.
Assembly of the kit is easy and only requires a screwdriver, no soldering required. Full assembly instructions can be found here.
*Please Note: When the top panel is reversed the matt side of the HIPS is exposed.
*Artwork Cover Kit available (currently priced at £7.99).
This clear cover fits over the controller – simply sandwich your artwork in between. You can create your own artwork, use a poster or print something out to give your controller a whole new look..
The artwork cover is laser cut from 1.5mm PETG, so it is durable and optically clear. It does not require any extra fittings or affect the functionality of the arcade controller. It comes in two sizes to fit our different controllers and you can download a template to make sure your artwork fits perfectly.
Note!
*Price is final - no negotiations in PM unless otherwise stated.
*Declaration is to be followed by PM.
*If contact has not been made within 24 hours i will move on to the next in-line without any further contact.
Edit: Price reduced to £40.
New and unused.
What's included?
Laser cut HIPS shell
1 x Sanwa Denshi Co. JLF-TP-8YT Ball Top Arcade Joystick
2 x Sanwa Denshi Co. OBSF-30 Arcade Buttons
1 x Mini Monster Interface Kit
1 x Wiring Loom
1 X 9 Pin Extension Cable - 1.8M
1 x Artwork cover kit template for use with the additional kit available for purchase directly from Monster Joysticks website.
*All Necessary Fixtures and Fittings.
Compatibility List:
Commodore Amiga 500 -- > 4000 Computers
Atari ST
Atari 2600
Amstrad CPC
Commodore 64
Sega Master System
ZX Spectrum (Kempston)
Asking Price
Payment PayPal (Friends & Family or pay the correct fees).
Postage £3.39 Royal Mail 48 Tracked (UK Mainland).
Overseas buyers welcome. Ask for a shipping quote when declaring interest, if interested.
Manufactures Info:
Take Your Retro Gaming To The Next Level.
The Mini Monster Retro Gaming Joystick Kit from Monster Joysticks is designed to offer the best quality joystick experience for your retro computers and consoles.
The shell has been laser cut from high quality HIPS (High Impact Polystyrene) which results in an extremely durable and reliable casing. The joystick and buttons are all genuine Sanwa Denshi Co. arcade parts, these are designed to survive the most extreme usage and offer some of the highest precision available.
Designed to be fully reversible for left and right handed players*, it also features a toggle switch to allow players to map up on the joystick to the 2nd button for 1 button games that use up to jump.
Assembly of the kit is easy and only requires a screwdriver, no soldering required. Full assembly instructions can be found here.
*Please Note: When the top panel is reversed the matt side of the HIPS is exposed.
*Artwork Cover Kit available (currently priced at £7.99).
This clear cover fits over the controller – simply sandwich your artwork in between. You can create your own artwork, use a poster or print something out to give your controller a whole new look..
The artwork cover is laser cut from 1.5mm PETG, so it is durable and optically clear. It does not require any extra fittings or affect the functionality of the arcade controller. It comes in two sizes to fit our different controllers and you can download a template to make sure your artwork fits perfectly.
Note!
*Price is final - no negotiations in PM unless otherwise stated.
*Declaration is to be followed by PM.
*If contact has not been made within 24 hours i will move on to the next in-line without any further contact.
Edit: Price reduced to £40.
Attachments
Last edited:
