Hi!
I have for sale Nexys4DDR Artix-7 FPGA board for development and/or use with these retrocomputers cores:
Mega 65
Commodore PET2001
Sam Coupe
Apple IIe
Board and package are used, but like new.
In case of retrocomputers cores I can add latest published cores.
Price is 150 € + shipping 15 € inside Europe.
Board details:
Nexys4DDR Artix-7 FPGA
Features
Stats:
Processor/IC: Xilinx Artix-7 FPGA XC7A100T-1CSG324C
Connector(s):
UART/JTAG USB port
Pmod port for XADC signals
Audio connector
Ethernet connector
USB host connector
microSD card connector
12-bit VGA output
Four Pmod ports
Power jack
Programming: Vivado Design Suite as well as the ISE toolset
Features:
Xilinx Artix-7 FPGA XC7A100T-1CSG324C
15,850 logic slices, each with four 6-input LUTs and 8 flip-flops
4,860 Kbits of fast block RAM
Six clock management tiles, each with phase-locked loop (PLL)
240 DSP slices
Internal clock speeds exceeding 450 MHz
On-chip analog-to-digital converter (XADC)
128 MiB DDR2
Serial Flash
Digilent USB-JTAG port for FPGA programming and communication
microSD card connector
Ships with rugged plastic case and USB cable
USB-UART Bridge
10/100 Ethernet PHY
PWM audio output
3-axis accelerometer
16 user switches
16 user LEDs
Two tri-color LEDs
PDM microphone
Temperature sensor
Two 4-digit 7-segment displays
USB HID Host for mice, keyboards and memory sticks
Pmod for XADC signals
12-bit VGA output
Four Pmod ports
Package Content
1x Nexys4DDR Artix-7 FPGA Board in a custom hardshell plastic case with protective foam
1x USB cable
Associated Pmods
Overview of Pmods associated with this board.
References
Manufacturer name: Digilent
Manufacturer's part name(s): Nexys 4 DDR Artix-7 FPGA: Trainer Board Recommended for ECE Curriculum
Manufacturer's part code(s): 410-292
Resources
Product Page at Digilent Inc.
Digilent Inc. Support Forum
Miro
I have for sale Nexys4DDR Artix-7 FPGA board for development and/or use with these retrocomputers cores:
Mega 65
Commodore PET2001
Sam Coupe
Apple IIe
Board and package are used, but like new.
In case of retrocomputers cores I can add latest published cores.
Price is 150 € + shipping 15 € inside Europe.
Board details:
Nexys4DDR Artix-7 FPGA
Features
Stats:
Processor/IC: Xilinx Artix-7 FPGA XC7A100T-1CSG324C
Connector(s):
UART/JTAG USB port
Pmod port for XADC signals
Audio connector
Ethernet connector
USB host connector
microSD card connector
12-bit VGA output
Four Pmod ports
Power jack
Programming: Vivado Design Suite as well as the ISE toolset
Features:
Xilinx Artix-7 FPGA XC7A100T-1CSG324C
15,850 logic slices, each with four 6-input LUTs and 8 flip-flops
4,860 Kbits of fast block RAM
Six clock management tiles, each with phase-locked loop (PLL)
240 DSP slices
Internal clock speeds exceeding 450 MHz
On-chip analog-to-digital converter (XADC)
128 MiB DDR2
Serial Flash
Digilent USB-JTAG port for FPGA programming and communication
microSD card connector
Ships with rugged plastic case and USB cable
USB-UART Bridge
10/100 Ethernet PHY
PWM audio output
3-axis accelerometer
16 user switches
16 user LEDs
Two tri-color LEDs
PDM microphone
Temperature sensor
Two 4-digit 7-segment displays
USB HID Host for mice, keyboards and memory sticks
Pmod for XADC signals
12-bit VGA output
Four Pmod ports
Package Content
1x Nexys4DDR Artix-7 FPGA Board in a custom hardshell plastic case with protective foam
1x USB cable
Associated Pmods
Overview of Pmods associated with this board.
References
Manufacturer name: Digilent
Manufacturer's part name(s): Nexys 4 DDR Artix-7 FPGA: Trainer Board Recommended for ECE Curriculum
Manufacturer's part code(s): 410-292
Resources
Product Page at Digilent Inc.
Digilent Inc. Support Forum
Miro
Last edited:
