Does TF328 firmware Version 41 support bigger CF than 8 GB?

  • Thread starter Thread starter awmosoft
  • Start date Start date
  • Replies Replies 4
  • Views Views 535
A

awmosoft

Amiga1260
AmiBayer
Joined
Jan 24, 2009
Posts
575
Country
Gennep, The Netherlands
Region
Limburg
At the moment I have version 39 and when I try a 16 GB Sandisk card than it does not boot.
Which programmer do I need to flash it? Can be done with this?:


How do I connect the Dupont cables?
 
Are You sure it's because of the Firmware and is not Kickstart 3.1 related?

You need to build new Kickstart (from 3.2.2 modules for example) to be able to use bigger CF Cards..

Another option could be to use PFS filesystem:
 
I created an 16 GB CF with PFS, but doesn't see the CF. I also tried the Amiga Game Selector 2.3a image on a 32 GB CF and still not booting.
I also tried other CF adapters and CD32, but still has this problem.

If I put the 16 GB or 32 GB CF in the SX32,T360 or TF330 then it sees the CF card and will boot.
 
You can use a rasperry pi to update the firmware to ver 41, here is a link to a Youtube video where the guy shows you how to do it, he is updating a TF330 but it will be the same for the TF328


As 8bit says you will need to use a filesystem like PFS3 aio to see 16gb
 
FYI - I updated the link to the PDF for the instructions in the video description. hope you find it helpful.
 
You must log in or register to reply here.
Back
Top Bottom