For sale are some boards that let you connect 2 drives (or Gotek) in your A500 6a internally.
You can select the drive to boot from, while the other drive is always active as df1, by a jumper pin.
As I have some switches left, I can include one instead of the jumper pin, if you are going to make a hole to your Amiga, but this switch will not be provided in the future sales.
You only have to connect 2 test clips (hooks) on 2 ic's next to the board.
So you don't need to do any soldering.
Power cable for 2 drives included.
Unfortunately you cannot use the external drive port along with this board.
To use the external drive port, a modification needs to be done on the motherboard. Instructions can be given.
I am asking35€ 30€ plus shipping to EU only, through PayPal fn'f.
On sale elsewhere.
Any questions are welcome.
Thank you.
Edit: you can have a look of this project here https://github.com/roddersuk/AmigaDualFloppyInterface
Edit: tested in A500+ working as expected.
Edit: New price 30€
You can select the drive to boot from, while the other drive is always active as df1, by a jumper pin.
As I have some switches left, I can include one instead of the jumper pin, if you are going to make a hole to your Amiga, but this switch will not be provided in the future sales.
You only have to connect 2 test clips (hooks) on 2 ic's next to the board.
So you don't need to do any soldering.
Power cable for 2 drives included.
To use the external drive port, a modification needs to be done on the motherboard. Instructions can be given.
I am asking
On sale elsewhere.
Any questions are welcome.
Thank you.
Edit: you can have a look of this project here https://github.com/roddersuk/AmigaDualFloppyInterface
Edit: tested in A500+ working as expected.
Edit: New price 30€
Last edited: