RetroAmi.com.pl
Active member
Hello, now it's time to say goodbye to this nice device for CD32. It expands stock CD32 by Fast Memory, HDD Drive, FDD, Video/Parralel/Seria/Keyboard/External FDD port. That makes from stock CD32 an A1200 with CD-ROM 
I bought it years ago and like most of my hardware it went on shelf. I tested it today for few hours and I can say that it has 8MB of Fast RAM, no FPU, HDD has 2 partitions of 250MB each. I can't check what size of HDD it is as HDToolBox doesn't recognize ProModule's IDE controller. FDD works nice, video and keyboard (I've tested 4 different keyboards) ports too. I didn't test rest of ports because of lack reliable devices.
I don't have any manual or driver disk. ProModule is configured to work with external PSU, You'll have to provide some or reconfigure the device.
The device had some issues at the start but it seemed that edge connectors were dirty and there were bad contact - after powerup CD32 reported broken FastMemory - HDD was working fine. I cleaned connectors in CD32 and Promodule and after that the issue dissapeard. I disconnected and connected both devices for several times and the problem was no more.
Previous owner installed WB3.9 and since I have my own copy of that AmigaOS I kept it. But Promodule goes without AmigaOS3.9 so if new owner would not provide proof that he own legal copy of AmigaOS 3.9 that he can use with this hardware. I'll format HDD before shipping.
In total You'll get ELSAT ProModule with FDD/HDD/8MB FAST, riser, AT-PS/2 keyboard adapter.
I'm selling it as a private person so no warranty, no refunds or no returns.
Price I'm asking for it is €400+ shipping cost.
Payment by PayPal as a gift or IBAN (-5% discount for item).
I bought it years ago and like most of my hardware it went on shelf. I tested it today for few hours and I can say that it has 8MB of Fast RAM, no FPU, HDD has 2 partitions of 250MB each. I can't check what size of HDD it is as HDToolBox doesn't recognize ProModule's IDE controller. FDD works nice, video and keyboard (I've tested 4 different keyboards) ports too. I didn't test rest of ports because of lack reliable devices.
I don't have any manual or driver disk. ProModule is configured to work with external PSU, You'll have to provide some or reconfigure the device.
The device had some issues at the start but it seemed that edge connectors were dirty and there were bad contact - after powerup CD32 reported broken FastMemory - HDD was working fine. I cleaned connectors in CD32 and Promodule and after that the issue dissapeard. I disconnected and connected both devices for several times and the problem was no more.
Previous owner installed WB3.9 and since I have my own copy of that AmigaOS I kept it. But Promodule goes without AmigaOS3.9 so if new owner would not provide proof that he own legal copy of AmigaOS 3.9 that he can use with this hardware. I'll format HDD before shipping.
In total You'll get ELSAT ProModule with FDD/HDD/8MB FAST, riser, AT-PS/2 keyboard adapter.
I'm selling it as a private person so no warranty, no refunds or no returns.
Price I'm asking for it is €400+ shipping cost.
Payment by PayPal as a gift or IBAN (-5% discount for item).
