hardframe 2000 in A4000

jvdbossc

HypnusBE
Joined
Nov 11, 2009
Posts
3,326
Country
Belgium
Region
Antwerp (province)
I just put the card in (without anything connected) and my A4000 does not work whith the card in.

No early boot menu... When removed normal boot!

I must admit it is in an elbox mediator, and there is a pci card in line with it?

When I put it not in line with a pci card, I can't see the HD, but the system boots, somethimes without a mouse.. The 1.3 boot disk with it's tools crash. Had one red expansion board not functioning to.

HDtoolbox does not see anything?

---------- Post added at 20:38 ---------- Previous post was at 19:05 ----------

Got again, without any device connected a red screen (not working)

After a reboot, got no boot at all..:huh:

Wondering if I did it myself.

Still have scsi for my A500 need, so if somebody can confirm this is a good way to hook up to a 50 pins amiga board before anything else turns up to be defective after this..

 

rkauer

Amiga fanboy
Joined
Dec 17, 2007
Posts
10,337
Country
Brazil
Region
São Leopoldo, RS
Probably a clash between the Meh!diator and the controller card.

Anyway you need to know what is the device's name, which is not SCSI.device.

If you have sysinfo or even another benchmark/information program in your Amiga, just look in the devices list to locate the correct controller's name.
 
Top Bottom